Why do I need to Relight my pilot light?
Why do I need to Relight my pilot light?
You might have purposely blown out the pilot light in summer to save energy, and now you need to relight it as part of your winter home maintenance routine. Regardless of the reason, your gas water heater or furnace can’t turn on if the pilot light is out.
Can a gas oven pilot light be relighted?
Keep reading for the steps to follow in relighting pilot lights in a gas furnace, water heater, oven, or stove. One caveat, however: If you detect the strong smell of natural gas, do not attempt to light the pilot. Instead, leave the house and call your local gas company or 911.
What to do when your water heater pilot light goes out?
When the pilot light goes out, here’s how to light a gas water heater pilot light: Your first step is obvious: to try to re-light the water heater pilot light. First things first, try to light it again before assuming there is a major problem.
How do you relight a furnace pilot light?
Wait five to 10 minutes for any residual gas to clear out of the furnace. Turn the gas control knob or knobs to the ON position. Replace the access panel. Turn the electrical power to the furnace back on. Set your thermostat to your desired temperature. After a few seconds, the pilot will light up, igniting the furnace’s burners.
Do you have to reset pilot light to relight?
In fact, it is really not a matter of “relighting” the pilot, but rather of resetting the pilot light. To do this, you must shut off the gas supply, effectively resetting the system and resetting the pilot. You won’t need any tools to reset the pilot.
What to do if you have the wrong pilot light?
If you have the wrong pilot burner replace it with the correct one. Important: Before troubleshooting the pilot light, keep in mind that a pilot flame is always ON and the flame should be blue. If it is yellow, it needs an adjustment. Make sure that the tank is completely filled with water before lighting the pilot light.
Keep reading for the steps to follow in relighting pilot lights in a gas furnace, water heater, oven, or stove. One caveat, however: If you detect the strong smell of natural gas, do not attempt to light the pilot. Instead, leave the house and call your local gas company or 911.
What to do if your hot water heater pilot light won’t stay lit?
If you have followed these steps and your water heater pilot light won’t stay lit, you may need professional help to fix the problem, give All Masters a call if you live in Arlington TX, and we can fix any of your hot water heater thermocouple or pilot light issues!
How do you relight a gas furnace pilot light?
How to Relight a Pilot Light on a Gas Furnace or Water Heater Turn the gas regulator valve to the “Off” position. Locate the pilot burner near the gas valve and remove the cover if it has one. Turn the gas valve to the “Pilot” position, which resumes the flow of gas to the pilot opening.
Can a thermocouple be bent away from the pilot light?
When it’s bent to a certain extent away from the pilot light, it’s no longer functional because it won’t be able to detect the heat. To fix this is also simple: bend the thermocouple back into its original position. Make sure to bend the thermocouple back so it’s close enough to the pilot flame so it lightly touches the thermocouple.
What’s the best way to relight a pilot light?
Relight the pilot light. Turn the knob to “Pilot,” and let gas to flow to the pilot. Light a lighter or match, then push in the reset button. Hold your flame to the pilot light’s opening. Keep the reset switch depressed until the pilot light is burning steadily. Then, release the button.
What does it mean when your pilot light goes out?
A pilot light is a small flame inside the device that is lit at all times. This flame is used to restart the main burner and prevent gas leaks. If you have a newer appliance, don’t panic if you don’t see a pilot light. Many new devices use electric ignitions in place of pilot lights. Pilot lights will occasionally go out.
What to do when your propane pilot light goes out?
If there is any gas odor or if there are any odors that could mask the smell of propane, such as musty or damp smells, do not attempt to relight the pilot light or use any flames, lights, or any other device that can cause sparks, such as cell phones, landline phones, or electrical appliances.
Can a gas water heater turn on if the pilot light is out?
Regardless of the reason, your gas water heater or furnace can’t turn on if the pilot light is out. Fortunately, relighting a pilot light is easy. All you need is a long-neck multipurpose lighter and a flashlight. NOTE:Never relight the pilot if you smell gas. This indicates a leak and could cause an explosion if you light a match or lighter.
