Where to find service number on Kohler toilet?
Where to find service number on Kohler toilet?
Check if Your Toilet Is a One-Piece or Two-Piece Toilet Look for Model and Parts Numbers If you have a toilet manufactured after 1990, various service part numbers are listed on the underside of the lid. The toilet tank number is imprinted on the inside back of the tank.
Where do I find the part number on my toilet?
Part numbers are imprinted on the underside of the tank lid. Toilets manufactured prior to 1990 do not have part number labels on the underside of the lid. The toilet number is imprinted on the inside back of the tank.
What are the different colors of Kohler toilets?
Kohler Toilets Related Items Code Color Name Code Color Name Color Name 0 White 02 Spruce Green Lavender 04 Suez Tan 06 Skylight Black 08 Cerulean Blue 10 Peachblow Jersey Cream 17 Teal 18 Sunrise Avocado
What’s the model number on a one piece toilet?
One-piece toilet: The number inside the tank is the primary toilet model number. Two-piece toilet: The number inside the tank is specifically for the tank (the bowl has its own model number). The bowl of a two-piece toilet has the model number molded into the china on the underside of the bowl flange.
Where do I find the part numbers on my Kohler toilet?
The replacement part numbers for the float/fill valve, flush valve, tank gasket and flush ball/flapper are listed for each toilet. To view all the service parts for your toilet, visit for the expanded service parts pages. Part numbers are imprinted on the underside of the tank lid.
What kind of fill valve do I need for Kohler Wellworth toilet?
If your existing fill valve stem is BLACK with a large insert, use GP1083167. Flush Actuator Toilet Seat – This specialty toilet seat is required for the flush actuator to work properly and is not replaceable with our standard “will fit” seats. Packaging for this item may state to use a different valve (GP1083167).
What kind of gasket do I need for Kohler toilet?
The GP83888 flush valve gasket must be installed with the larger flat surface facing toward the tank (opposite of the way the red gasket is shown on the flush valve.) Please Note: Large O-ring may fit tight and may need to be slightly stretched out using both hands (no tools) in order to be installed.
Where do you find the manufacturer number on a toilet?
Most often you’ll find a manufacturer name or number (either stamped or painted with waterproof paint) above the water line, but some of them are below the water line or behind the fill valve. Take your time and hold the flashlight at an angle to help you better see any stampings.
What kind of toilet tank does Kohler have?
Canister flush valve provides smooth flushing actuation with consistent water usage, flush after flush Combines with K-4436 Wellworth toilet tank to create K-3575 Wellworth round-front toilet with 12-Inch rough-in
Is the Kohler k-4436-o a direct replacement?
Great price, and an excellent replacement tank. My tank was marked as K-4436-AA, but the K-4436-O was a direct replacement. The tank was delivered the next day (!!!), and was packaged well with no damage. Installation was easy, with no leaks.
How much water does a Kohler Wellworth toilet use?
KOHLER has the same conservation ideals as you, designing this Wellworth high-efficiency toilet tank in white to provide superb flushing power while using less water. This unit delivers 1.28 Gal. per flush, which is a huge improvement over 3.5 Gal. toilets that were commonly installed in American houses in the 1980s and early 1990s.
Great price, and an excellent replacement tank. My tank was marked as K-4436-AA, but the K-4436-O was a direct replacement. The tank was delivered the next day (!!!), and was packaged well with no damage. Installation was easy, with no leaks.
Check if Your Toilet Is a One-Piece or Two-Piece Toilet Look for Model and Parts Numbers If you have a toilet manufactured after 1990, various service part numbers are listed on the underside of the lid. The toilet tank number is imprinted on the inside back of the tank.
Canister flush valve provides smooth flushing actuation with consistent water usage, flush after flush Combines with K-4436 Wellworth toilet tank to create K-3575 Wellworth round-front toilet with 12-Inch rough-in
KOHLER has the same conservation ideals as you, designing this Wellworth high-efficiency toilet tank in white to provide superb flushing power while using less water. This unit delivers 1.28 Gal. per flush, which is a huge improvement over 3.5 Gal. toilets that were commonly installed in American houses in the 1980s and early 1990s.
What kind of toilet tank does Kohler k-4421 have?
Pair this tank with the K-4309 bowl for a complete toilet. 1.28 gpf (4.8 lpf). Left-hand Polished Chrome trip lever. Combines with the K-4309 bowl to create a complete K-3609 Cimarron toilet. Coordinates with other products in the Cimarron collection.
Is the Kohler 2 in.canister flush valve covered by warranty?
The Kohler 2 In. canister flush valve is for use with Cimarron toilet tanks. Use genuine Kohler replacement parts to protect the warranty on your toilet. Kohler plumbing products are covered under a limited warranty to be free of defects in material and workmanship for 1 year from date of installation
Where is the Flapper on a Kohler dual flush toilet?
If you have a Dual Flush toilet, you will see a two-button actuator on top of the toilet rather than a trip lever. Inside the tank you will not see a flapper but a cylinder-shaped flush valve. These toilets do not use a flapper, but a seal. If your toilet is leaking water into the bowl, the seal needs to be replaced, not the flush valve. 5
The Kohler 2 In. canister flush valve is for use with Cimarron toilet tanks. Use genuine Kohler replacement parts to protect the warranty on your toilet. Kohler plumbing products are covered under a limited warranty to be free of defects in material and workmanship for 1 year from date of installation
If you have a Dual Flush toilet, you will see a two-button actuator on top of the toilet rather than a trip lever. Inside the tank you will not see a flapper but a cylinder-shaped flush valve. These toilets do not use a flapper, but a seal. If your toilet is leaking water into the bowl, the seal needs to be replaced, not the flush valve. 5
Which is Kohler toilet has Class 5 canister?
Please see K-3609 Cimarron Comfort Height two-piece toilet for full details Class Five canister flush valve provides smooth flushing actuation, with consistent water usage, flush after flush Exclusive DryLock (TM) fast installation system prevents potential leak points during installation and throughout the life of the product
How can I tell if my toilet is one piece or two piece?
Check if Your Toilet Is a One-Piece or Two-Piece Toilet Look for Model and Parts Numbers If you have a toilet manufactured after 1990, various service part numbers are listed on the underside of the lid. The toilet tank number is imprinted on the inside back of the tank.
What kind of flapper does a Class 5 toilet have?
Toilets that have a 3¼-inch flapper are Class Five toilets. All Class Five toilets use fill valve GP1083167. For detailed parts listings, see pages 42-45. 9 Flapper Part numbers are imprinted on the underside of the tank lid. Toilet number is imprinted on the inside back of tank. 3¼-Inch-Flapper, Two-Piece Toilets
What is the model number on a Kohler one piece toilet?
In some cases, the model number is preceded by 97 or F. For example, 974166 contains the model number 4166, and F4166 contains the model number 4166. One-piece toilet: The number inside the tank is the primary toilet model number. Two-piece toilet: The number inside the tank is specifically for the tank (the bowl has its own model number).
Where is the fill valve number on a Kohler Class 5 toilet?
Fill valve (red cap) GP1083167 Part numbers are imprinted on the underside of the tank lid. Toilet number is imprinted on the inside back of tank. Toilets that have a 3¼-inch flapper are Class Five toilets. All Class Five toilets use fill valve GP1083167. For detailed parts listings, see pages 42-45. 9 Flapper
Check if Your Toilet Is a One-Piece or Two-Piece Toilet Look for Model and Parts Numbers If you have a toilet manufactured after 1990, various service part numbers are listed on the underside of the lid. The toilet tank number is imprinted on the inside back of the tank.
