Where is the model number on a Moen cartridge?
Where is the model number on a Moen cartridge?
The model/series number is usually a four or five digit number beginning with “7” or “8” and may be followed by letters. The series number may sometimes be found on the underside of the spout. The series number is often found on the back of the decorative ring located at the bottom of the spout.
How to replace a side spray valve Moen?
Replacing a Side Spray 1 Snap the side spray retainer to end of the side spray hose. 2 The side spray hose and retainer will click into valve body for secure connection. Note: This piece will only fit in one way. 3 To test this, gently tug on the quick connect.
Where can I get a Moen faucet cartridge replacement?
Moen does have an excellent warranty on their products so you should be able to get replacement cartridge free of charge from your local Moen retailer such as a hardware store or contact Moen directly. In this case there was also a small plastic component inside which was broken and they have sent a replacement for that as well.
Where can I buy Moen shower head parts?
Replacement parts, filters, cartridges and accessories are just a click away. Genuine Moen parts are designed to extend the life of your faucets. Your Moen faucet or shower head may also work with specialized parts and accessories for optimal performance. For service and support call 1-800-BUY-MOEN
How can you tell when Moen parts need to be replaced?
The best way to figure out what replacement part or accessory you need is if you know the “Model Number” of your Moen product. Once you know this, the replacement part or accessory can be identified using the product’s “Exploded Parts View” pdf document that can be found on the product’s website page.
Can a one handle Moen cartridge be replaced?
Currently used as a replacement cartridge for older one-handle faucets. It is not compatible with newer faucets, which are now designed around the 1255 Duralast® cartridge. Brass construction; 180-degree rotation from hot to cold. There is no repair kit available for the 1200 cartridge, it can be replaced with a new 1200 or a 1225 cartridge.
Replacing a Side Spray 1 Snap the side spray retainer to end of the side spray hose. 2 The side spray hose and retainer will click into valve body for secure connection. Note: This piece will only fit in one way. 3 To test this, gently tug on the quick connect.
Where is the Moen cartridge valve stem located?
The cartridge valve stem is the moving piece inside the sleeve that is connected to the faucet handle and changes the mix between hot and cold and sometimes flow. Standard cartridges are designed for faucets, Roman tubs and tubs/showers. The original Moen cartridge, the 1200 provided one-handle operation.
