Where can I find the model number of my toilet?

Where can I find the model number of my toilet?

If you have a distinctive toilet, such as those pictured below, you may be able to find your model number simply by looking through our toilet picture pages.

What’s the tank number on a crane toilet?

Crane tank numbers also use four digits (a few models have 5 digit numbers), starting with a ‘3’. Crane often used the same tank for a number of different toilet models, which may cause some confusion. But finding parts is very simple: trust in your tank number!

Where are the numbers on a Gerber toilet tank?

Gerber tank numbers are stamped on the back wall of the tank. In pressure‐assist models, the number will be closer to the top of the tank; those without pressure assist should have the number stamped just above the water line. Kohler tank numbers also follow a four‐digit pattern (sometimes five), often starting with a “K‐”.

What is model number on Universal Rundle toilet?

A problem unique to Universal Rundle toilets is that some newer series of toilets re‐used a model number from an older series. The Astoria toilet made after 1995, for instance, has a model number 4470 — the same number that was used for the New Venus series toilets in the 70s and 80s.

Where do I find the model number on my toilet?

Disregard names on the seat as they are seldom the same brand as the toilet. The number: Look under the water tank lid (on the bottom), or on the inside walls of the tank.* The number on the lid may or may not be the same as the in the tank or the number of the complete toilet model.

Where can I find the name of the toilet?

Disregard names on the seat as they are seldom the same brand as the toilet. The number: Look under the water tank lid (on the bottom), or on the inside walls of the tank.*

What’s the name of the valve in the toilet?

Toilet fill valve: This is the part of the toilet responsible for refilling the tank after each flush. Toilet flapper: Situated at the base of the tank, this lifts and triggers a flush of water to the toilet bowl. It is also called a flapper valve. Tank lever: Connected to the handle, this lifts the rubber flapper, which triggers the flush.

Are there any American standard toilet faucet parts?

Stan.) are made in the U.S. The word “standard” and “American Standard®” are NOT identical. Most of their faucet parts will only fit their brand (as is the case with their competitors as well). Many of their toilet parts will only fit their brand of toilet. Not all of American Standard® parts are universal (“standard”).

Elsewhere in your toilet tank, you should find a date stamp that will tell you when the toilet was manufactured. Be aware that not all tanks may have a model number or date stamp, and sometimes the model number can be difficult to find.

Is the Toto Neorest AH an IoT toilet?

Please Contact Your TOTO Sales Representative for IoT Pricing. The linear design of the NEOREST AH pursues the ultimate simplicity to accentuate any modern space. The AH has an edgy shape that leaves a sharp impression when seen from any…

Which is the most intelligent toilet from Toto?

TOTO’s most intelligent toilet meets an ultra-modern wall-hung design. The NEOREST® AC™ features revolutionary technologies such as Actilight® and… TOTO’s most intelligent toilet meets an ultra-modern wall-hung design. NEOREST® EW™ features revolutionary technology such eWater+® to help reduce the need…

Is there a manufacturer that has the same model number?

Use the links to jump directly to that manufacturer. Note that while manufacturer numbering conventions are generally different, there may be more than one manufacturer with the same number (especially if you have only a partial model number).

Where do you find the bolt on a toilet?

If you had a special brand toilet that required a special type of bolt the name of the toilet would be found inside of the tank. or embossed into the finish. Both the bolts and the rubber ring that goes between the bowl and the tank are standard items, much like the wax ring that seals it to the drain. Thank you everyone! 🙂

If you have a distinctive toilet, such as those pictured below, you may be able to find your model number simply by looking through our toilet picture pages.

Where is the model number on a Kohler intelligent toilet?

Intelligent toilet: The model number can be determined by the serial number. Serial numbers are located behind the access panel, on the back of the lid, on the underside of the toilet, or under the vitreous shell. Bidet: The model number can be determined by the serial number.

How can I tell if my toilet is one piece or two piece?

Check if Your Toilet Is a One-Piece or Two-Piece Toilet Look for Model and Parts Numbers If you have a toilet manufactured after 1990, various service part numbers are listed on the underside of the lid. The toilet tank number is imprinted on the inside back of the tank.

Where can I Find my Flushmate serial number?

Your serial number can be found on the label of your Flushmate unit, inside the toilet tank. Find the center sequence and enter in the field above. No results found. Need product help?

Toilet serial numbers can be found in the following locations: Record your serial number and contact the Customer Care Center at 1-800-4KOHLER (1-800-456-4537). They will be able to determine your toilet’s model number from the serial number. Model numbers in older toilets may be hard to read due to mineral or bacterial growth within the tank.

Where do you find the model number on a fish tank?

The model number is located inside the tank, either molded into the china or stamped with blue or black ink. The model number consists of four digits and may include a K prefix. In some cases, the model number is preceded by 97. For example, 974166 contains the model number 4166.

When was the Savage Model 99 magazine discontinued?

The Model 99 was finally discontinued in 1998, by which time the rising cost of labor meant that even the detachable magazine version could no longer be profitably produced. These lever action rifles were introduced when the American lever action was first being challenged by the European bolt action magazine rifle.