Where can I buy a saniaccess 3 pump?

Where can I buy a saniaccess 3 pump?

 Where to buy? The Saniaccess 3 is a 1/2 HP pump system used to install a complete bathroom up to 15 feet below the sewer line, or even up to 150 feet away from a soil stack. It incorporates a macerating system which can handle human waste and toilet paper in residential applications.

Can a saniaccess 3 be connected to a regular toilet?

The Saniaccess 3 unit must be connected to our rear discharge toilet. This system uses much less water than a regular toilet. Note: This toilet only works in combination with Saniflo systems. The Saniaccess 3 has been certified to American and Canadian Standards.

How does a saniaccess 3 Macerator work?

When the flush is activated, the water flowing into the Saniaccess 3 activates a micro switch in the pressure chamber, which in turn starts the motor. The motor is sealed for life in an oil filled enclosure. A common spindle/shaft drives the impeller and the macerator blades. The moving parts therefore are kept to an absolute minimum.

How to install a saniflo water supply system?

Saniflo Installation Made Simple: Your Step-by-Step Guide. 1 1. Gather all Your Equipment. You won’t need much to install your Saniflo system. Just gather the following things before you begin: 2 2. Pick a Site. 3 3. Install the Discharge Pipe. 4 4. Connect Your Water Supply. 5 5. Plug the System in.

Where do you use the saniflo macerating pump and Bowl?

SaniACCESS2 macerating pump, tank and bowl plus FREE soft-close Toilet Seat! The Saniflo Saniaccess is a system that is used to install a half-bathroom up to 15 feet below the sewer line, or even up to 150 feet away from a soil stack.

Is the saniaccess 2 connected to the toilet?

The second service panel provides ready access to the basket area around the macerating blades for easy removal of any large objects that may have been accidentally flushed. The Saniaccess 2 unit must be connected to our rear discharge toilet. This system uses much less water than a regular toilet.

How does a saniaccess 2 Macerator work?

When the flush is activated, the water flowing into the Saniaccess 2 activates a micro switch in the pressure chamber, which in turn starts the motor. The motor is sealed for life in an oil filled enclosure. A common spindle/shaft drives the impeller and the macerator blades.