When to install combi boiler with mixer shower?
When to install combi boiler with mixer shower?
We have just moved into a house which has a combi boiler which was installed late 2016/early 2017. Since we have moved in, we have found that the shower (a standard mixer shower installed pre combi boiler) runs cold after a couple of minutes for around 30 seconds to a minute before warming back up again.
Why does my Combi shower mixer not turn on?
When checking the boiler they noted that the blue light was not on for all the time the shower was and that this would go off and only come back on after the shower ran cold. The engineer advised that this is likely an issue with the shower mixer and it not pulling enough through quick enough.
What should the flow rate be for a combi shower?
Ideally, the combi boiler flow rate for a good shower should be at least 12 – 15 litres a minute. The flow rate simply refers to how much water can pass through the appliance to feed taps and showers once the boiler is working.
Do you need a thermostatic valve for a combi shower?
With a combi, you definitely want a thermostatic valve. Your plumber needs to check what’s happening at other hot water outlets. It’s pretty simple to determine if the problem is with the shower valve or the boiler. Either way, it doesn’t sound like something you have the skills to resolve.
Can you have a mixer shower with a combi boiler?
This means that you may be able to save money by choosing to fit an electric shower. Can you have a mixer shower with a combi boiler? Mixer showers do work with combi boilers. These models connect to both your hot and cold water supply and deliver water at the temperature you want.
Where can I buy a thermostatic mixer shower?
Thermostatic Mixer Showers | Showering | Screwfix.com Buy Thermostatic Mixer Showers at Screwfix. Look at our wide range of styles from leading manufacturers with a great choice of concealed & exposed valve types.
Ideally, the combi boiler flow rate for a good shower should be at least 12 – 15 litres a minute. The flow rate simply refers to how much water can pass through the appliance to feed taps and showers once the boiler is working.
Can you run a thermostatic mixer on a combi?
You’ll get a much better shower via the combi but may have problems if some one turns on a hot or cold tap when it’s in use. A thermostatic mixer valve will help in trying to avoid heat changes if this happens but can’t do anything about flow dropping.
