Whats the best speaker wire for subs

If your sub system is going to put out more than 1,000 watts RMS, you can use 12-gauge speaker wire. But 16-gauge speaker wire works well for most installations.

What gauge wire is best for subs?

The signal and power coming out of your amplifier must not be impeded on their way to your speakers and subs. When you replace or run new speaker wiring, we recommend using: 18-, 16-, or 14-gauge wires for speakers. 16-, 14-, or 12-gauge wires for subwoofers.

What is the best material for speaker wire?

For the best quality wire, looking for something made with 100% copper is highly recommended. However, if you’re looking to save a bit, copper-plated or copper-clad aluminum wire is a fine substitute, and there is no noticeable difference in sound quality.

Does Speaker Wire matter for subs?

Quick answers: Does speaker wire affect sound quality? Under normal circumstances, the answer is NO: speaker wire does not affect sound quality.

What's better OFC or CCA?

Two standard types of wire for car audio are CCA (Copper-Clad Aluminum) and OFC (Oxygen-Free Copper). … It’s less expensive than a wire that’s made up entirely of copper such as OFC. It’s also lighter than pure copper wire. CCA does a better job of conducting electricity than a wire made entirely out of aluminum.

Is 12 gauge wire good enough for subwoofers?

Jaeden, For wiring subwoofers, we recommend using wires of 12- to 16-gauge in size. There will be no audible difference between them – just less power loss with larger wire.

Is 12 AWG speaker wire overkill?

Similarly, is 12 AWG speaker wire overkill? Thick wire (12 or 14 gauge) is recommended for long wire runs, high power applications, and low-impedance speakers (4 or 6 ohms). For relatively short runs (less than 50 feet) to 8 ohm speakers, 16 gauge wire will usually do just fine. …

Is Thicker gauge speaker wire better?

The lower the gauge number, the thicker the wire. … Thick wire (12 or 14 gauge) is recommended for long wire runs, high power applications, and low-impedance speakers (4 or 6 ohms). For relatively short runs (less than 50 feet) to 8 ohm speakers, 16 gauge wire will usually do just fine.

Does thicker speaker wire sound better?

Speaker wires can’t be too thick because thicker wire means lower resistance, more signal flow, and better sound quality.

What gauge wire should I use for a 1000 watt amp?

If your amp is capable of 1000 watts RMS then it requires 4 gauge wire.

Article first time published on

Does length of speaker wire affect sound?

When speaker cables are different lengths, this causes the impedance values to be unequal. This explains why many people believe that it’s important to keep the wires consistent in lengths, but in reality, the difference in impedance values is so minimal that it has no impact on the overall sound quality.

Is lower gauge speaker wire better?

A lower-gauge number indicates a thicker wire, while a higher-gauge number indicates a thinner wire. Speaker wires with lower-gauge numbers are better at carrying an amplified audio signal. … However, for longer speaker wire runs (to another room, for example), it is better to use a thicker, lower-gauge wire.

Is 18 gauge speaker wire good?

For most low power home or car speakers (not subwoofers) 18 gauge (18AWG) is fine. 18AWG wire is good for about 50 watts for 4 ohms and 100 watts for 8 ohm loudspeakers up to 50 feet (15 m) or 100 feet (30 m) respectively. For higher power systems or longer lengths, 16 gauge is a great choice.

How many amps can 1 0 OFC wire handle?

Wire GaugeRecommended Maximum Fuse Size00 awg400 amps0 awg325 amps1 awg250 amps2 awg200 amps

Does OFC cable make a difference?

There’s a big difference between copper-clad aluminum (CCA) and oxygen-free copper (OFC) wiring. … Copper wiring on the other hand produces less heat and reduces the overall strain on your car’s system. Another benefit of OFC wiring includes less oxidation. Oxidation reduces current-carrying efficiency of the wire.

How many watts can 1 0 gauge wire handle?

Wire Gauge SizeTotal Amplifier RMS Wattage0/1 AWG1000+ Watts2 AWG1000-1500 Watts4 AWG400-1000 Watts6 AWG600-800 Watts

Can I mix 12 gauge and 14 gauge wire?

Can you mix 12 gauge and 14 gauge wire? – Quora. If we are speaking of the US the answer is yes however, even if the supply is 12AWG, the breaker must be replaced with a 15 Amp breaker becuase the 14 awg wire is the smaller load carrying conductor.

Can speaker cable be too thick?

Can a speaker wire be too thick? Speaker wire cannot be said to be too thick. Having a thick speaker wire is nothing to worry about. The thicker the speaker wire, the lower the resistance it presents to the current flow.

How many watts can 12 gauge speaker handle?

For up to 20 ft of cable length a 10 gauge cable can handle 2000 watt and a 12 gauge speaker wire can handle 1960 watt.

What wattage subwoofer should I get?

If you have a large room, or one that’s open to the rest of the house, a 12-inch, 100-watt sub isn’t likely to cut it. In fact, it’s probably safe to consider 12-inch, 100-watt subs as the minimum. Be wary of subs with less than 100 watts, and if the driver is smaller, you’ll need a lot more power.

What gauge wire should I use for a 3000 watt amp?

The entire kit is compatible for 4 gauge installation and can handle up to 3000 watts of power. This wiring kit is the tight bond that glues your entire car audio system together, so invest in quality and choose the Q Power Super Flex 4 Gauge 3000 Watt Amplifier Wiring Kit today.

How many watts can 14-gauge speaker handle?

For a 120-volt circuit, you can load 2,400 watt onto your 14-gauge wiring.

What happens if speaker wire is too small?

Your receiver is heating up due to the ac impedance being too small, this causes the current in the wires to go up. But the “smaller” wires results in more resistance. (so, with more resistance, you get less current). But, if you have frayed wires, and they are bridging the terminals, then this will cause overloading.

Do banana plugs affect sound quality?

Banana plugs do not affect the sound directly, but there are several reasons that they do preserve and improve sound quality in the long term. The most common reason is that the banana plugs prevent the wires from being exposed, which reduces the risk of wear and tear, preventing loss of sound quality.

Do expensive audio cables make a difference?

If you have a modest system, investing in expensive cables may not be the best way to spend your money. Cables make a difference, but it’s a smaller difference than upgrading speakers, electronics, or turntable systems.

What's the difference between 14 gauge and 16 gauge speaker wire?

What Is Bigger – 14 or 16 Gauge Wire? 14-gauge speaker wire is thicker than 16-gauge. 14 gauge wire is 1.6mm in diameter and 16-gauge wire is 1.3mm in diameter.

How far can you run 14 gauge speaker wire?

The rule is the total resistance of the wire should be less than 5 percent of the rated impedance of the speaker. Your Insignias are 8-ohm speakers, which means 16 gauge is good for up to a 48-foot run (per speaker). Speaker wire of 14 gauge is good for an 80-foot run, and 12 gauge is good for 120 feet.

Does wire thickness affect sound quality?

Having the wrong thickness will affect the sound quality of your speaker. Speaker wire thickness needs to be at most 5 percent of the speaker’s rated electrical resistance. Impedance, or electrical current resistance, increases with cord length, so more powerful speakers require a thicker cord.

What happens if wire gauge is too big?

Having “too big” or heavy of a gauge is generally not a bad thing. If anything, it’s an advantage, offering less resistance over longer cable lengths, resulting in less voltage drop. If the wire gauge NUMBER is ‘too big’, that means that the wire itself is too small.

Is it bad to mount amp on sub box?

It’s not ideal and safe to mount an amp on a sub box. That’s mainly because vibrations from the subwoofer box can cause the internal components of the amplifier to damage over time. However, if your sub box doesn’t flex too much or vibrate excessively, you can mount an amp on it.

What size amp do I need for a 1200w sub?

You can run a “1200w speaker” with a 10 watt amp.