What to do if your printer says paper is jammed?
What to do if your printer says paper is jammed?
That way, our Canon Forum members and our Subject Matter Experts will be able to assist you with paper jam troubleshooting and suggestions specific to your printer model. Thanks! 01-27-2013 11:30 AM
How to remove a document from a jammed scanner?
The error message may be followed by Clear the scanner jam. Remove the jammed document. 1. Remove any paper from the ADF that is not jammed. 2. Open the ADF cover. 3.
What should I do if my ADF is jammed?
1. Remove any paper from the ADF that is not jammed. 2. Open the ADF cover. 6. Lift the document cover and pull out any jammed documents to the right. – If there are no errors, go to step 10. a. Pull out the ADF document support.
What should I do if I have a document Jam?
Carefully check for and remove any small pieces of paper or other objects under the document cover. Pull down the small cover, then check for paper. You can insert a piece of stiff paper, like cardstock, into the ADF to push any small paper scraps through. 8. Close the document cover. 9. Press Cancel. – If there are no errors, go to step 10.
That way, our Canon Forum members and our Subject Matter Experts will be able to assist you with paper jam troubleshooting and suggestions specific to your printer model. Thanks! 01-27-2013 11:30 AM
The error message may be followed by Clear the scanner jam. Remove the jammed document. 1. Remove any paper from the ADF that is not jammed. 2. Open the ADF cover. 3.
1. Remove any paper from the ADF that is not jammed. 2. Open the ADF cover. 6. Lift the document cover and pull out any jammed documents to the right. – If there are no errors, go to step 10. a. Pull out the ADF document support.
What should I do if my garbage disposal is jammed?
Crawl under it and look for a red button. If it looks like it’s sticking out, push it back into the unit. This may fix the jam right away. If the reset button isn’t sticking out, move on to other methods that involve manually rotating the grinders to clear the blockage. Keep the unit unplugged. Wait 15 minutes if the button pops out again.
