What to do if your hot water heater wont light?
What to do if your hot water heater wont light?
When the water heater pilot light goes out, first try relighting it, following the directions on the water heater label. If the pilot doesn’t relight, if it goes out right after lighting or if it goes out repeatedly, by far the most common cause is a bad thermocouple.
What would cause a water heater not to stay lit?
When the pilot light on a water heater will no longer stays lit, it typically means the thermocouple is bad. Thermocouples are little electric generators that create a magnetic current that holds open a magnetic gas valve inside the control unit on the front of the water heater.
Why will pilot light not light?
There are several possible reasons why your gas furnace pilot won’t light: an ongoing draft, a faulty thermocouple, an accumulation of dirt, or an inefficient supply.
Why is my gas hot water heater not working?
The other less common problem would be the gas valve. A bad gas valve will not allow any gas to go to the burner or pilot light. If the pilot light lights and then shuts off it is not the gas valve. If it won’t light at all, see the article, ‘ Fixing Hot Water Heater Gas Valves ‘ for the issues surrounding this device.
What to do if your hot water heater pilot light goes out?
Replacing the thermocouple usually does the trick. If your hot water heater suddenly stops working, chances are a bad thermocouple has shut off the gas to the pilot light. Replacement is an easy DIY repair. No hot water? If you have a natural or propane gas water heater, chances are the pilot has gone out.
How can I repair my ge water heater?
We will show you the potential causes and after you enter your model number into the search field, we’ll sell you the exact part that fits your water heater and show you how to install it. We carry more than 4 million parts from over 175 major brands, so chances are, we’ve got the part you need.
How long does it take to fix a gas water heater?
2-minute video: gas water heater won’t light – Fix it yourself in 30 mins and under $15! If playback doesn’t begin shortly, try restarting your device.
How to troubleshoot a General Electric water heater?
Thankfully, the two most common problems associated with General Electric water heaters are easy to diagnose and easy to remedy. Ensure that the water heater’s power supply (gas or electricity) is on. If troubleshooting a gas water heater, make sure that the gas is on, then relight the pilot flame with a BBQ lighter at the base of the water heater.
The other less common problem would be the gas valve. A bad gas valve will not allow any gas to go to the burner or pilot light. If the pilot light lights and then shuts off it is not the gas valve. If it won’t light at all, see the article, ‘ Fixing Hot Water Heater Gas Valves ‘ for the issues surrounding this device.
How to troubleshoot pilot light in gas water heater?
When troubleshooting lighting problems, it is recommended to test it first. Turn the gas OFF to the water heater and press the piezo igniter. Once pressed, the electrode should release the spark. Check if the wire connection is tightened correctly. Make sure the electrode is not broken, and replace it if it is.
2-minute video: gas water heater won’t light – Fix it yourself in 30 mins and under $15! If playback doesn’t begin shortly, try restarting your device.
