What should I know about Toro tmc-212 irrigation controller?

Page 1 TMC-212 Residential and Commercial Irrigation System Controller User’s Guide… Remote Control Ready Automatic Circuit Protection—Eliminates Fuse Non-volatile Program Memory—Eliminates Battery The TMC-212 controller features several unique and helpful operating characteristics.

Can a tsm-02-h be used in a tmc-212 controller?

Although the TSM-02-H module can be used in any TMC-212 controller, it will only provide high (6.0 Kv) surge protection when installed in Outdoor controller models TMC-212-ODH and TMC-212-ODH-50H.

What happens to program memory on Toro tmc-212?

Clearing the Program Memory The user-defined watering program information stored in the TMC-212 memory will be retained for several years. If controller power is lost for more than 24 hours, only the time and date will need to be reset. Note: Expansion modules are available in Standard- surge (TSM-02) and High-surge (TSM-02-H) versions.

How often to soak flower beds with Toro tmc-212?

Friday on program B and drip irrigation to soak the flower beds every three days on program C. Note: Although the TMC-212 offers the multiple program feature, you may want to use one program only if it meets your needs. The remaining programs can be turned off and on as you need to use them.

How does the Toro sprinkler system tmc-212 work?

The TMC-212 has a default watering program that will automatically control your sprinkler system when power is initially applied. Setting the Watering Day Schedule Each program can have its own Calendar, Interval, Odd or Even schedule, but only one schedule can be active at a time for that program.

Although the TSM-02-H module can be used in any TMC-212 controller, it will only provide high (6.0 Kv) surge protection when installed in Outdoor controller models TMC-212-ODH and TMC-212-ODH-50H.

How does the irrigation system work in Toro?

Each valve is connected to a numbered terminal within the controller, identifying it as Station 1, Station 2, etc. The controller operates the valves in order, one at a time. In other words, one station would water completely before another station would turn on. This is called a watering cycle.

What should I do if my Toro sprinkler system is not working?

Using a central control, you can program the timer to electronically open or close valves to send water to specific zones within your irrigation system at scheduled times. If your Toro sprinkler timer is not working properly, some simple troubleshooting steps may identify and help resolve the problem.

How many sprinkler stations does Toro tmc-212 series controller have?

For flexibility and reduced inventory – modular from 2 to 12 stations in 2-station increments. Three independent programs and four start times per program. For circuit protection and faster troubleshooting. Requires no batteries and holds programming for up to five years. Pump Delay and Well Recovery/Station Delay with Pump-enabled Option.

How long does a Toro greenkeeper sprinkler system run?

The Toro GreenKeeper TMC212 sprinkler system allows you to set up to three watering programs by odd and even days or intervals for supplying the correct amount of water to each zone of your lawn. Run time can be adjusted from one minute to four hours with four separate start times per program.

How are stations assigned to an irrigation system?

Only one start time per active program is required, a second start time will cycle the program an additional time. Individual stations are assigned to a program (A,B,C). Each program requires only one start time to initiate a watering sequence of all the stations assigned to that program. Start times are assigned to programs, not stations.

What should I know about Toro tmc-212 irrigation controller?