What Sander do I need for furniture

It depends on the type of furniture, but generally, a palm sander or detail sander is the best option for refinishing furniture because their smaller shape accommodates both small and large projects. Rotary, random orbital, or belt sanders also suitable for medium and large woodworking projects.

Can you use an electric sander on furniture?

A small electric sander is often the best bet for household furniture refinishing projects. While you might have previously used a bit of sandpaper and some elbow grease, many projects require a hand sander to speed up the process.

What is difference between orbital and palm sander?

As compared to a palm sander, orbital sanders are more massive tools, which means that palm sanders are smaller and more lightweight. The motions of orbitals are Circular and orbiting, and palm sanders only have orbiting motion. If you want to work with larger pieces, orbital sanders are better than palm sander.

Can you use an orbital sander to refinish furniture?

Unlike a belt sander, an orbital finishing sander rotates at “random” which minimizes scratches and sanding marks. Although best for flatter surfaces, random orbital sanders are great for large pieces of wood and give you the option of sanding on any type of furniture, as well as wood floors and paneling.

Which orbital sander is best?

• Porter-Cable Random Orbital Sander.
• Skil 5” Random Orbital Sander.
• Makita Random Orbital Sander.
• Dewalt Random Orbit Sander.
• Black+Decker Random Orbit Sander.

Is a round or square sander better?

Advantages. The best feature of the orbital sander is its square shape, which allows it to get in corners and up against edges. … Compared to sanding across the grain by hand or with a belt sander, they leave less obvious cross-grain marks, which means that it’s harder to ruin your work.

What kind of sandpaper do you use to refinish furniture?

The grades of sandpaper used most for furniture finishing fall in the fine and very fine categories – that is from 120 grit through 220 grit; with 320, 400 and 600 grit used for special purposes. For “hard to stain” woods, finish sanding with 120 grit will usually accommodate the problem.

What is a strip sander good for?

A belt sander or strip sander is a sander used in shaping and finishing wood and other materials. It consists of an electric motor that turns a pair of drums on which a continuous loop of sandpaper is mounted. … Sometimes they are also used for removing paints or finishes from wood.

When should I use an orbital sander?

Random orbital sanders are ideal for quick sanding needs. You can use them to smooth surfaces such as rough metal, wood or plastic. They can be used to remove paint or rust. These sanders are best used on flat surfaces and should be held with even pressure across the face of the pad.

Do you need variable speed orbital sander?

Variable Speed I often slow a random-orbit sander down when working on veneered materials to reduce the likelihood of sand-through. I also run at a lower speed when using the sander to smooth a finish. Although it adds a bit more cost to the machine, variable speed is well worth having.

Article first time published on

What sandpaper should I use for wood?

Primary sanding of rough wood and the removal of planning marks on wood is often best done with medium-grit sandpaper. Fine sandpapers range from 120- to 220-grit. For most home workshops, this sandpaper will suffice for final sanding before the work is finished.

What should I look for in an orbital sander?

When choosing a random-orbit sander, look for a motor size, body configuration, and pad size (5- or 6-inch) that fits your workload. A decent palm-size unit will cost between $50 and $100, while heavy-duty right-angle or in-line ones cost $150 to $200.

How do you sand an old dresser?

Sand the dresser using a medium-grit sandpaper, moving with even pressure and in the direction of the grain. Sand thoroughly, including all details. Wipe down with a tack cloth to remove dust. Sand again with a finer-grit sandpaper.

How long should you use a sander for?

Sanding a furniture piece should never take more than 5 minutes.

Do you have to sand wood furniture before painting?

As with any paint job, clean the surface well before beginning (and if you’re not sure which method to use, test a few in small patches before committing to the whole job). …

Is it better to sand or strip furniture?

Stripping is Faster and Often Safer. Stripping a finish is faster than sanding to remove it. But more importantly, sanding cuts through stain and patina (the color changes in wood caused by light and oxidation), and it does so unevenly. …

What do I need to sand a table?

Sand the table, beginning with the coarsest-grit sandpaper (100 grit) and sanding in the direction of the wood grain. Next, sand the table with the 150-grit paper, and finish by sanding with the 220-grit paper. Wipe the surface of the entire table using the tack cloth.

What is a 1/3 Sheet sander used for?

1/3 Sheet Sanders Information It has a much less agressive action than belt sanders or random orbit sanders, so is not recommended for heavy stock removal and is instead most commonly used for finishing applications like fine sanding, chamfering edges and sanding in between coats of varnish.

How thick must wood be to use standing in the sander?

A plank of hardwood at full thickness should be able to stand between 6 and 10 refinishings in its lifetime. Generally, these are 3/4 of an inch thick.

Do I really need a belt sander?

If you’re looking to strip down and finish entire planks, a belt sander is a good choice because it will offer pretty uniform results across the breadth of its sanding surface. As you can probably imagine, a belt sander won’t work very well if you really need to do finesse work or shaping.

What speed should I use orbital sander?

While the dial can be set from 1 (low) to 6 (high) speed, the recommendation is from 4 to 6 on all surfaces and with all sanding grits besides light sanding on paintwork (2 to 3 is recommended, in grits ranging from 180 to 400).