What makes a washer agitate?
What makes a washer agitate?
The transmission in a top load washer is responsible for converting the rotating motion of the motor to the back and forth motion for the agitator. The transmission has an input shaft that is driven by the motor either directly or by a belt, as well as an output shaft to drive the agitator.
What does the actuator do in a washer?
The actuator serves several functions. It has a synchronous motor that shifts the splutch cam ring and monitors the position of the splutch. It also houses a transmission speed/position optical sensor.
Can a top load washer spin with the lid up?
The washer will not agitate or spin with the lid up, though many models will still fill and drain and the timer will advance. Most models have either a lid switch probe or a magnet on the lid that activates the lid switch when the lid is closed. If missing or damaged, the washer will not agitate or spin, even with the lid closed.
How to fill a top load washing machine?
1 Unplug the washer for 1 minute from the electrical outlet. 2 Plug the washer back in and lift and lower the lid 6 times within a 12 second period. 3 You have 30 seconds to start lifting and lowering the lid. 4 The motor has now been reset and is ready for you to start a cycle.
Why does my ge top load washer not spin?
Make sure the washer lid is down. Some older washers will agitate with the lid up, but none will spin with lid up. “SPIN” light is flashing or “bALAnCINg” (balancing) is in the display (2015 and newer models):
Why is my top load washer not filling?
Check the speed selector switch. Make sure it is pointing at the speed, not stuck in the middle. Turn the switch to the correct speed and try again. If the washer is stored in below freezing temperatures, water in the pump can freeze and lock the motor.
The washer will not agitate or spin with the lid up, though many models will still fill and drain and the timer will advance. Most models have either a lid switch probe or a magnet on the lid that activates the lid switch when the lid is closed. If missing or damaged, the washer will not agitate or spin, even with the lid closed.
Why does my washing machine only spin one item?
Many people are having issues with new washing machines that refuse to spin just one item, or maybe just a few items. Sometimes it may have been a reasonably sized load in their old washing machine but they’ve now bought one with a large capacity drum so the load is still relatively small.
1 Unplug the washer for 1 minute from the electrical outlet. 2 Plug the washer back in and lift and lower the lid 6 times within a 12 second period. 3 You have 30 seconds to start lifting and lowering the lid. 4 The motor has now been reset and is ready for you to start a cycle.
Make sure the washer lid is down. Some older washers will agitate with the lid up, but none will spin with lid up. “SPIN” light is flashing or “bALAnCINg” (balancing) is in the display (2015 and newer models):
