What is the Whirlpool setting on my pool filter

Whirlpool position: Used when you want the water to bypass you filter. … Drain position: Water from pool does not get filtered but goes directly out your backwash waste hose. This position is also handy if you are vacuuming up debris that you don’t want in your pool or filter.

What setting should my pool pump be on?

The lever should be on the ‘Filter’ setting most of the time. This is the setting that provides normal pool filtration by pushing the water through the filter media (sand, glass beads or D.E) that then traps any dirt and debris before the water is returned to the pool.

What setting do you put your pool filter on when vacuuming?

If you have a sand filter and are vacuuming to waste, set filter to “waste” option. …
Otherwise, leave setting on “filter” and turn pump on to begin vacuuming. …
Vacuum your pool just as you would vacuum your living room, picking up debris or algae as you go.

When should I recirculate my pool filter?

Recirculate – This setting is used to troubleshoot problems with the filter sand and is especially useful if you are battling an algae bloom. The water will circulate in the pool normally, but will bypass the filter sand.

What are the settings on a sand filter pump?

Filter: Use for normal filtration or vacuuming the pool.
Backwash: Is used to clean filter sand. …
Rinse: To clean water inside filter tank. …
Waste: Use for vacuuming heavy concentrations of dirt directly to waste. …
Closed: Use for shutting off the flow to the filter and pool.

Is it OK to run pool pump 24 hours a day?

The size of your pool, the efficiency of your pump and filter, and how dirty your pool is are just some of the factors you need to consider. Nevertheless, most pool cleaning professionals would advise against running a pool pump for more than 8 hours a day.

Should I run my pool pump on filter or recirculate?

You should run your pump/filter as long as it takes to keep the pool clean. Some pools have great circulation combined with low use, therefore run times can be quite short. Other pools have lousy circ systems and huge bather loads and even 24/7 filtration has trouble keeping up.

Do you vacuum a pool on backwash or waste?

Don’t use any metal object that can rust as a weight. 8. Vacuuming pool with filter valve in “backwash” position. When a pool is vacuumed with the sand filter valve in the “filter” position, the dirt and debris that passes through the pump ends up inside the filter on top of the bed of sand which is where you want it.

Should I run my pool pump at night or during the day?

It’s always best to run the pool pump during the hottest times of the day. The sun is one of the causes of chlorine depletion in your pool. The water moving around helps protect the chlorine from being burnt out from the sun.

What is pool filter backwash?

Well, as the name suggests, backwashing involves reversing the flow of water through your filter media, be it Zeoplus, sand, glass pearls or diatomaceous earth (DE). This dislodges dirt and debris that may have become trapped, and flushes it out through your multiport valve waste line.

Article first time published on

Do you leave skimmer basket in when vacuuming pool?

You need to leave the skimmer basket in under the skim vac plate, this allows the skimmer basket to catch your debris, and you can empty it quickly without having to turn your pump off and on like you would without it.

What is the winter setting on pool pump?

After a backwash and rinse, place the valve to the “winterize” setting on the top mount valve. This will allow water to drain from the valve. Next, you’re going to have to completely drain all the water from the filter tank. To do this simply unscrew and remove the drain cap on the bottom of the filter barrel.

What's the difference between backwash and waste?

Drain/Waste: Opting the drain or waste setting will remove pool water without forcing it through the filter. Backwash: This clears out any debris, dirt and other contaminants that may have accumulated on the filter.

Do pool pumps use a lot of electricity?

Outside of the air conditioner, the pool pump is the largest electricity consumer in the average pool-containing home. According to the study, at the national average of 11.8 cents per KWh, a pool pump alone can add as much as $300 a year to an electric bill.

Do you run pool pump while raining?

We recommend that our customers run their pumps rain or shine UNLESS we have an electrical storm. In that case, lightning could strike an outside circuit, which could damage your pump and other equipment. If you’re worried about lightening, turn the pump off or shut off the breaker.

Can I leave my pool pump off for a week?

Yes you can turn your pool pump off for a week. You can turn it off for a month, but there are consequences. The pool will get dirty—no pump, no filtering. The chemicals will not circulate and the water could start turning a nice shade of green as algae forms.

How many hours a day should I run my pool pump?

Overall, the lessons learned today is you should run your pool pump an average 8 hours a day to properly circulate and clean your water. The pump should push your entire pool in gallons in this 8 hour period of time. Residential pool water only needs to be turned over once daily to have proper filtration.

Do you leave pool pump on all the time?

Although it’s generally recommended that all the pool water undergo filtration every 24 hours, the pump does not need to run all the time. … If your pool is in constant use, you may need to run the pump for up to eight hours per day, frequently checking the water clarity and chemical balance.

How long can pool water sit without chemicals?

I think the answer to your question is about 3-6 days. The problem is that the chlorine that you need to keep the bacteria in check is used up more quickly as the temperature rises, the activity increases, and as sweat and other body stuff is put into the pool.

Should you rinse after backwash?

Backwashing reverses the flow of water, lifts up and flushes the sand, and then expels the dirty water via a waste line into the ground or drain. In order to prevent residual blow back into the pool, once you’ve finished backwashing it’s highly advisable to rinse the filter.

How often should you backwash a pool?

As a general rule, you should be backwashing your pool about once a week or in conjugation with your scheduled maintenance. Another industry standard is to backwash when your filter’s pressure gauge reads 8-10 PSI (pounds per square inch) over the starting level or “clean” pressure.

Do you backwash before vacuuming?

For proper vacuuming suction, it is important that the filter is clean prior to vacuuming. If necessary, backwash before vacuuming also. … Make sure to monitor your water level as you vacuum, and stop to add more water to the pool if necessary before continuing. The pump cannot be allowed to run dry.

Do all pool filters have backwash?

Whether you choose to clean your pool with a sand or DE filter, you can easily backwash it on your own. All pool filters follow the same general steps for backwashing, but there may be small variations depending on the model you own. The owner’s manual should have detailed instructions for backwashing your filter.

What pressure should I backwash pool?

How Often Should I Backwash? A good rule of thumb is to backwash once the pressure displayed on your pressure gauge is 8-10 psi over the starting level. Backwashing after heavy rains, treating for algae, or when trying to clear cloudy water will keep your filter working efficiently.

How often should I backwash My DE filter?

Bottom line, the filter must be backwashed on a regular basis to ensure that your pool water is clear. “When do we need to backwash?” – It is recommended to backwash your filter once every 4-6 weeks of regular use.

How often do you change sand in sand filter?

On average, sand should be replaced every 3-5 years. This may be longer if the pool stays clear, or shorter, if the filter runs all the time. The jagged edges of the sand wear down and become smooth as the sand ages.

Should the pool drain be open or closed?

For proper water circulation, it is best to position the flap so that it is about 2/3 closed. This will allow for more flow through the main drain than through the skimmer, which will promote a “bottom-to-top” circulation throughout the pool.

How often does a pool need to be vacuumed?

The most important thing you can do on a regular basis is to vacuum your pool. This should be done at least once a week, ideally twice. However, if you don’t have a lot of debris, such as leaves, bugs, etc. or if you have a screened in pool, once a week should be sufficient.

Should I keep my pool pump running in winter?

The point of running your pool pump in the winter is to keep your water moving, which prevents it from freezing should temperatures get too low. So ideally, run your pump (and keep it running) whenever temperatures start getting close to 32 degrees Fahrenheit, the freezing point of water.

Will a sand filter freeze?

In the case of top mounted sand filters, the valve can pop off the top, cracking the tank flange. D.E. and cartridge pool filters can suffer damage to the internal grids and elements if a full filter tank freezes solid, cracking and crushing the media.