What is the operation and installation manual for Rinnai?
What is the operation and installation manual for Rinnai?
Operation & Installation Manual This appliance shall be installed in accordance with: • Manufacturer’s Installation Instructions • Current AS/NZS 3000, AS/NZS 3500 & AS/NZS 5601 • Local Regulations and Municipal Building Codes including local OH&S requirements This appliance must be installed, maintained and removed by an Authorised Person.
Is the Rinnai Water Heater compatible with solar?
The range of Rinnai continuous flow water heaters referred to in this manual are incompatible with solar water heating systems. A dedicated range of solar compatible continuous flow water heaters is available from Rinnai. Always check water temperature carefully before use.
How does anti frost protection work on Rinnai?
(Anti-frost protection is fitted as standard equipment on External units and is available as an optional extra on Internal Units). The delivered water temperature is controlled automatically. The flow may vary depending on the delivery temperature selected and the ambient water temperature. NOTE
What kind of warranty does a Rinnai boiler have?
A single cookie will be used in your browser to remember your preference not to be tracked. Select a region. Commercial-grade units with the industry’s best warranty. Rinnai’s super high-efficiency models offer sleek design, maximum output and an array of features ideal for the hot water demands of large homes.
How does the Rinnai hydronic air handler system work?
Rinnai Vent-Free Convectors push heat to the farthest reaches of the room, evenly warming larger spaces and maximizing cost-savings. The Rinnai Hydronic Air Handler System easily integrates with select tankless water heaters or boilers to deliver energy-efficient warmth.
Why does my Rinnai Water Heater have code 10?
Remove burner and inspect copper fins in heat exchanger for a build up between fins. This will cause air flow restrictions which can lead to code 10’s. If build up is present, you will need an air compressor capable of delivering 120 psi of air to blow out the burner and heat exchanger fins.
How to troubleshoot a Rinnai tankless air unit?
Turn off gas valve feeding the appliance. Unplug igniter wire; hold the igniter wire with an insulated pair of pliers about a 1/4″ from a piece of metal. Cycle the unit to ensure you see a spark when unit is cycling.
A single cookie will be used in your browser to remember your preference not to be tracked. Select a region. Commercial-grade units with the industry’s best warranty. Rinnai’s super high-efficiency models offer sleek design, maximum output and an array of features ideal for the hot water demands of large homes.
