What is the molding in the middle of a wall called

Chair rail by definition is molding on an interior wall that is attached horizontally around the perimeter of a room.

What is the molding on walls called?

A wall trim — also called interior trim — is a general term often used to describe all types of molding and millwork. It is used to frame windows, doors, walls, floors, even ceilings — defining the architectural style of a room.

What are the different types of Mouldings?

• Crown Moulding. Of all the different types of moulding, crown is the best known and — true to its name — the most regal. …
• Baseboard. Baseboards are a wooden trim which are placed at the transition from wall to floor. …
• Casing. …
• Chair Rail. …
• Picture Rail. …
• Board and Batten. …
• Wainscoting.

What are the square molding on walls called?

Picture frame moldings are just what they seem—square or rectangular shapes that look like empty pictures. They add a smart level of detail to walls in hallways and stairs. The addition of picture frame molding can imitate paneling on an otherwise plain expanse of wall.

What is decorative molding called?

Moulding (also spelled molding in the United States though usually not within the industry), also known as coving (United Kingdom, Australia), is a strip of material with various profiles used to cover transitions between surfaces or for decoration.

What is Wall trim and molding?

A small yet mighty design element in a room, trim is a type of millwork used on walls for both practical and decorative purposes. … “Trim and molding are used interchangeably to describe types of millwork,” says Macfarlane. “Casing is a specific type of molding used to trim windows and doors.”

What is cove Moulding?

Cove moldings are used where walls and ceiling meet. They have a concave profile, and for this reason, they are often used as inside corner guards, or to hide joints. Cove molding profiles are measured by the width, and then by the length of the profile.

What is the difference between Crown Moulding and cove moulding?

Cove molding performs the same function in the same place on the wall as crown molding. The main difference is the profile; cove molding has a concave profile, which bows inward, while crown molding has a convex, flatter appearance that projects out from the wall.

What is trim inside a house?

Interior trim—the molding or millwork used to frame windows, doors, walls, floors, even ceilings—helps define the architectural style of a room. It’s also an inexpensive way to transform the look of a space.

What does cove molding look like?

Also known as coving, cove molding is plain, concave-shaped trim employed where walls and ceilings meet. It can also be used on stairs, at the meeting of risers and treads. In essence, cove may be considered a less ornate version of crown.

Article first time published on

What is the difference between trim and molding?

This is a common question, and the answer is pretty simple. TRIM is a general term that refers to all molding in a home (i.e. window casing, door casing, baseboards, etc.). MOLDING (or moulding) is a broad classification of millwork (any type of woodwork that is produced in a mill …

What is colonial trim?

Colonial architecture accounts for a large period of American history during the 17th and 18th centuries. The Colonial Style moulding collection is inspired by the refined and classical Georgian period with its Palladian influence of proportions and details.

What is the trim inside windows called?

Casing is the decorative molding or framing around a window that is used to cover the space between the window frame or jamb and the wall.

What is interior window trim called?

Casing refers to the trim used around interior or exterior windows and doors. Casing is designed to cover the unfinished gap between walls and door or window frames.

When should you not use crown molding?

There are a couple of situations when you don’t want to use crown molding. If you have cathedral or vaulted ceilings, a typical crown molding will probably not fit or look good. Also, crown moldings need a distinct starting and stopping point, ideally going around a room in both directions and meeting again.

Do modern homes use crown molding?

Modern Interiors do not use crown, Traditional has additional layers of decorative molding, Transitional is somewhere in the middle.

What is dentil molding?

A dentil is one of a series of closely spaced, rectangular blocks that form a molding. Dentil molding usually projects below the cornice, along the roofline of a building. … The use of dentils is strongly associated with Classical (Greek and Roman) and Neoclassical (Greek Revival) architecture.

What is batten molding used for?

Batten trim or batten molding is a thin strip of trim typically with a rectangular cross-section, used to cover seams between panels of exterior siding or interior paneling.

What is header molding?

A decorative Moulding commonly installed at the top of a door or window that will create interest in any or all rooms. We recommend that they work in harmony with the style and size of your Baseboards, Casings and Crowns.

What is base molding?

The base molding is the board covering the bottom of the interior wall, in the joint where the wall and the floor meet. Base is commonly used in installation of hard surface flooring to cover expansion gaps in wood/laminate flooring or to cover the cuts when installation of tile or stone has occurred.

What is OG molding?

An ogee molding is an s-shaped profile consisting of two tangent radii semicircular arcs. … Whatever way you utilize our ogee designs, these stylish decorative molding profiles will enrich the architectural style of any fashionable home or office building.

What is clamshell molding?

Clamshell Casing, Clear Pine. by Mouldings. Casing is used to trim inside and outside door and window openings to cover the gap between drywall and the door or window frame. Casings are often the most visible molding profile in a room.

Is crown molding popular?

While crown molding is still a popular look, avoid it in these types of rooms as it may make the space look too busy.

What does colonial baseboard look like?

Baseboard Styles Ranch-style baseboard is a flat board about 2 1/2 to 3 1/2 inches wide, with a simple, rounded top edge. Colonial-style baseboard is similarly sized but has some type profiled top edge, the most common being the Roman ogee shape.

What is window molding?

Quite simply, it’s a moulding profile which frames (or trims) a door or window. … Casing is functional as well as decorative. The main purpose of casing is to surround all doors and windows, covering any space or gap left between the drywall and frame.

What is wooden trim?

Wood trim, alternatively known as wood fascia, is a fascia made of synthetic or varnished, natural wood, usually found on dashboards of luxury cars. Wood trim can be made from natural materials like beechwood, maple, walnut, oak, or from synthetic materials.