What is Loto procedure

Lock out, tag out (LOTO) is a safety procedure used in industry and research settings to ensure that dangerous machines are properly shut off and not able to be started up again prior to the completion of maintenance or repair work.

What is LOTO process?

A lockout-tagout (LOTO) procedure is a safety system used to prevent accidental or unauthorized access to electrical power sources that are undergoing maintenance or other work. … When multiple areas are being worked on simultaneously, the worker must use as many locks as necessary to secure power from the system.

What are lock out procedures?

What is lockout tagout? The term “lockout tagout” refers specifically to procedures used to ensure that equipment is shut down and inoperable until maintenance or repair work is completed. They are used to keep employees safe from equipment or machinery that could injure or kill them if not managed correctly.

What are the 6 steps of lock out/tag out?

Lockout/Tagout Step 1: Preparation. …
Lockout/Tagout Step 2: Shut Down. …
Lockout/Tagout Step 3: Isolation. …
Lockout/Tagout Step 4: Lockout/Tagout. …
Lockout/Tagout Step 5: Stored Energy Check. …
Lockout/Tagout Step 6: Isolation Verification.

Why is LOTO needed?

Lockout Tagout is necessary – WHY ? It is the right way of performing maintenance: … Before any machinery is repaired, maintained or cleaned, it must be shut down and its energy sources must always be locked out as per LOTO Procedure to ensure the safety of its employees and avoid OSHA Violations.

How many types of LOTO are there?

The four main types are gate valves, ball valves, plug valves and butterfly valves.

Who should use LOTO procedures?

They must also be authorized by the employer to use LOTO procedures. Authorized employees are not the only ones who need training. Employees who operate machines or equipment that will be maintained or serviced under LOTO, or work in an area where LOTO is used, are affected employees also need training.

How do you write a LOTO procedure?

Step 1: Preparing for shutdown. …
Step 2: Review the specific LOTO procedure for the asset. …
Step 3: Performing the shutdown. …
Step 4: Locating and disconnecting all energy sources. …
Step 5: Placing locks and tags. …
Step 6: Releasing or blocking any stored energy. …
Step 7: Verifying the lockout.

What is the first step to proper LOTO?

Step 1: Preparation – Lockout/Tagout. …
Step 2: Shut Down – Lockout/Tagout. …
Step 3: Isolation – Lockout/Tagout. …
Step 4: Lockout/Tagout. …
Step 5: Stored Energy Check – Lockout/Tagout. …
Step 6: Isolation Verification – Lockout/Tagout.

What are some examples of lockout techniques?

Performing Repairs within Heavy Machinery. …
Entering Areas with Moving Machine Parts. …
Reaching Into a Machine to Remove Damaged Part. …
Many Other Situations.

Article first time published on

Who can remove a LOTO device?

The Lockout Tagout devices are finally removed from an energy isolating device, only by the worker who applied it. The removal of employees lock without his knowledge can be dangerous, as a general rule, the Lockout Tagout device should be removed by the employee himself/herself. 5.

What is OSHA do?

With the Occupational Safety and Health Act of 1970, Congress created the Occupational Safety and Health Administration (OSHA) to ensure safe and healthful working conditions for workers by setting and enforcing standards and by providing training, outreach, education and assistance.

What is electrical lockout?

Electrical Lockout equipment is used for locking out switched off circuit breakers, preventing re-energising, to control dissipation of residual energy, to ground electricity and also to effectively tagout equipment.

What Colour are control locks?

Colour Coding Service for your Safety Padlocks Common practice is to use bright coloured (red) locks for high-risk operations, as most people recognise and aptly respond to this colour. The standard colours available for your safety padlocks and key tags are: Black, Blue, Green, Orange, Purple, Red, Teal, Yellow.

What are the devices of LOTO?

Electrical circuit breakers that are manually operated.
Disconnect switches.
Line valves.
Blocks.
Other devices that are used to adequately block and isolate energy sources, whether it be hydraulic, pneumatic, etc.

What is a LOTO document?

Your lock-tag-try (LOTO) process helps ensure that workers stay safe when around hazardous energy. More importantly, it safeguards workers from severe, debilitating, or deadly injury. … The following steps will guide you through editing a LOTO policy template document that is suitable for your needs.

Can you cut a Loto lock?

In the event the key to a lock is lost or misplaced, the lock may be cut by the LOTO Authorized Person after obtaining verbal permission from the Person In Charge of the LOTO.

What's the difference between lockout and tagout?

In practice, lockout is the isolation of energy from the system (a machine, equipment, or process) which physically locks the system in a safe mode. … Tag out is a labelling process that is always used when lockout is required.

Who must be notified when a piece of equipment is to be locked out?

The work area must then be checked to ensure all workers have been safety positioned or have cleared the area. In addition, all affected workers must be notified that the lockout or tagout devices have been removed before the equipment is started.

What are the 4 workers rights?

Workplace safety the right to refuse dangerous work and know that you’re protected from reprisal. the right to know about workplace hazards and have access to basic health and safety information. the right to participate in health and safety discussions and health and safety committees.

What happens during an OSHA inspection?

The inspection includes an opening conference, a “walkaround” of all or part of the workplace, and a closing conference. This may take a few hours or several weeks, depending on the number of hazards, workplace size, and other factors. Take notes throughout the process.

What are the types of OSHA violations?

Willful. A willful violation exists under the OSH Act where an employer has demonstrated either an intentional disregard for the requirements of the Act or plain indifference to employee safety and health. …
Serious. …
Other-Than-Serious. …
De Minimis. …
Failure to Abate. …
Repeated.

What is LOTO system in safety?

Lockout/tagout (LOTO) is a set of procedures that are used to ensure that equipment is shut down, inoperable, and (where relevant) de-energized. This allows maintenance and repair work on the system to be performed safely.

Do lockout locks have to be red?

At a minimum, a lock’s shape, or size, or color must provide employees with the capability to identify and distinguish a lockout device from other similar devices (e.g., security locks) in the workplace. … Moreover, the lockout devices cannot be used for purposes other than the control of hazardous energy.