What is a s104 agreement

A S104 (Section 104 of the Water Industry Act (1991)) agreement is a legal agreement between a developer and a water company, where the developer agrees to build sewers to an agreed standard, which the water company will then adopt.

What is a section 104 agreement?

A Section 104 agreement (under the Water Industry Act 1991) is an agreement between a developer and sewerage undertaker for the adoption of sewers serving a development. There are strict regulations in place for obtaining an agreement which can be a minefield for developers.

What is a section 185 agreement?

Introduction. Under Section 185 of the Water Industry Act 1991 (S185) where any public sewer, lateral drain or disposal main is situated in private land, any person(s) with an interest in that land or in adjoining land can, by giving notice, require Severn Trent Water (STW) to alter or remove that pipe.

Do I need a section 104 agreement?

Section 104 of the Water Industry Act 1991 provides a mechanism for newly-constructed private sewers and pumping stations to be ‘adopted’ by the local sewerage authority, who will then maintain them at their own expense. … A Section 104 adoption agreement must be entered into before construction of the sewers begins.

What is a build over agreement?

A build over agreement is a Water Authority seal of approval for the building work you plan to have carried out over or near a public sewer owned by them. It gives assurance that you have given the sewer the correct clearance from your new foundations.

What is sewer diversion?

If there is a public sewer within your proposed development site, a diversion may be required to allow your development to progress. Developers with an interest in land that contains public water or waste water assets can arrange for the alteration or removal those assets to allow development work to progress.

What is a section 102?

It is a provision in the Water Industry Act which allows an owner of a private sewer to apply to their sewerage provider (United Utilities, in this case) to take over responsibility for the sewer.

Are you allowed to cover over a manhole?

The simple answer is yes you can build over a manhole cover.

What happens if you don't get a build over agreement?

If no Build Over Agreement was entered into then the seller should have a CCTV survey of the sewer carried out and forward the footage to the Water Company. If the Water Company is satisfied the sewer is in good condition, they will issue a comfort letter confirming the sewer is in satisfactory condition.

Why do I need a build over agreement?

Why do I Need a Build Over Agreement? The main purpose of a Build Over Agreement is firstly to ensure that the sewer doesn’t get damaged and secondly to retain access for the water company to carry out its legal duty to repair and maintain sewers.

Article first time published on

How much does it cost to divert a sewer UK?

You also need to factor in the cost of getting permission from the local water authority to move the drain, which can be between £200 and £1,300. On average, you can expect to pay between £1,200 and £3,000 to move a drain for an extension. More complex jobs can cost up to £4,500.

Can I move a public sewer?

If you do need to move pipes or manholes, they will need to be completely removed and reconstructed outside of the extension area. For the Application, you will need drawings of your proposed extension and the locations of the sewers and manholes; you will also need to include the flow direction of the sewer.

Can you build over a sewer line?

Building close to or over a public sewer without having obtained formal approval is illegal. It may also jeopardise the future sale of your property.

When did build over agreements become law?

From October 2011 a law was passed that stated that all pre existing private sewers and all newly built sewers were to be automatically adopted by the water authority in the area where they are situated.

When did build over agreements come into effect?

Rules are now in place for private sewers, sewers and sewers, but this has only been in effect since 2011. But if your house was built before 1937 and runoff served more than one piece of land, it would have been considered a public sewer in the 1990s.

What does a build over indemnity policy cover?

Indemnity Insurance: To protect against any financial loss incurred as a result of the property (or part of the property) being built over a public sewer without a build over agreement. This option will be the quickest and cheapest option and avoids alerting the authority to work they may not agree.

Can you build a patio over a drain?

So, Can You Build Decking Over Drains or Manholes? Yes, you can. But when decking a patio or even a garage, remember to put in removable panels or inspection/maintenance hatches to allow access.

Can you build on a drain?

You can build over a private drain. Building control will inspect the pipework and approve the works as part of your extension.

Can you build a conservatory over a drain?

Unfortunately, you cannot build your conservatory over a manhole using conventional concrete foundations since manholes need to be accessible by the Water Authority. They need to have full access to the sewer system. … Instead, you could look to relocate your manhole, if it is affecting your conservatory build plans.

Can a waste pipe be moved?

To prepare for moving a waste pipe to a new location, you must always start by shutting the water off to the home. You should also already have a good idea of your new layout and know where your waste pipe needs to be moved before you start the job.

Can I run rainwater into sewer UK?

Most rainwater falling on properties drains into public sewers owned by the ten water and sewerage companies in England and Wales. … If rainwater does not drain from your property into a public sewer, because you have a soakaway or similar, you may be entitled to a surface water drainage rebate.

How much does it cost to move a sewer pipe?

cost to move a drain pipeNational Avg. Materials Cost per line$123.27National Avg. Cost (labor and materials) for 1 line$705.25National Cost Range (labor and materials) for 1 line$632.63 – $777.87

How deep are sewer pipes UK?

between 75 cm and 135 cm deep from the finished ground level. The minimum depth is to ensure frost protection (under normal UK conditions) and the maximum depth is to ensure reasonable access for repairs.

How much does it cost to move a drain field?

Drain field adjustment costs from $3500 all the way to $11,000. Depending of course on how much work needs to be done.

Do sewers run under houses?

Generally speaking, you’re usually responsible for drains inside the boundaries of your property, while the sewerage company is responsible for lateral drains, which are usually outside of property boundaries, and sewers. Although most sewers are now publicly owned, there are still some private or unadopted sewers.

How deep are main sewer lines?

Sewer lines on private property can be as shallow as 18–30 inches deep or as much as 5–6 feet deep. In areas with cold climates, the pipe will be buried deeper to prevent freezing in the winter. Pipe depth is not always a matter of climate.

Who is responsible for a blocked shared drain?

Assuming a detached property in London has no shared drains, then the homeowner is responsible for the drains up to the property boundary, and Thames Water is responsible for all blockages or repairs off your property.