What does GSW stand for water heater

The Department of Energy recommends setting your heater to 120 degrees Fahrenheit. … Now, some water heater temperature controls come with settings that read “A-B-C” as opposed to numbers. Generally, A means 120 degrees, B means 130 degrees, and C means 140 degrees.

What do the letters mean on a water heater?

How do you read a GSW serial number?

The first two numbers in the serial number are the year of manufacture, and the third and fourth numbers are the month for GSW water heaters. There may, or may not be, an initial letter before the numbers. For example, a serial number U1310372185 means that the water heater was manufactured in October of 2013.

Are GSW Water Heaters good?

Across Canada, GSW water heaters are recognized for their excellent value, efficiency and reliability. We’ve earned the trust and loyalty of Canadians by continuing to provide safer, more dependable electric and gas water heaters.

How can you tell how old a GSW is?

This can be determined by looking at the first four numbers, ignoring any letter that may start the serial number. The first two numbers represent the year the heater was built. If your heater was built before 2008, the next two numbers represent the month.

What does ABC mean on AO Smith water heater?

Most hot water heaters have a A-B-C knob. Here is what temperature each letter stands for: Hot- 120 degrees. A- 130 degrees. B- 140 degrees.

What letter should my hot water heater be set at?

Water heaters are factory set at OSHA recommended levels, around 140 degrees. On the other hand, the EPA suggests turning the thermostat down to 120 to reduce power consumption, and a booster heater to reach sanitizing temperatures at select outlets.

How long do giant water heaters last?

A properly installed and high-quality hot water tank will last between 8 to 12 years. Like everything else, time and consistent use will wear down the tank. The inside of your tank will go through process called electrolysis, which means that corrosive particles are pulled to an anode rod to protect the tank lining.

Who makes GSW hot water heaters?

GSW manufactures gas and electric tank-style and tankless water heaters for the Canadian market. GSW is a subsidiary of A.O. Smith Corporation, which had worldwide sales of approximately $3 billion in 2017.

How much does a high efficiency hot water tank cost?

Average Cost of a High-Efficiency Water Heater High-efficiency water heaters cost an average of $1,000 to $3,000 including the unit and labor. They’re anywhere from 100% to 300% more efficient than conventional water heaters.

Article first time published on

How long do water heaters last?

It would be nice to know when the time is right to replace your water before it springs a leak and causes an inconvenience or worse yet, damage to your home. Typically a residential hot water heater lasts between 6 and 13 years. Beyond 12 years, you are on borrowed time!

How do I check my hot water heater warranty?

You can tell the warranty at a glance by examining the first two to three digits of the model number. The length drops to one year when the heater is installed in any building other than a single family home.

Is 140 too hot for water heater?

Professionals recommend keeping your water heater set at a temperature between 130 and 140 degrees Fahrenheit. Any higher, or lower, could actually be dangerous for you and your family. While turning the temperature up higher can result in burns, turning it lower than the recommended setting can also be dangerous.

Is it bad to turn up water heater?

Set the temperature too low, and you could turn your water heater into a breeding ground for dangerous bacteria. … Set it too high, and you could be setting yourself up for a scalding accident.

What should AO Smith water heater be set on?

The default temperature setting on an A.O. Smith electric water heater is 120 degrees Fahrenheit. That’s partly to reduce power consumption, but A.O. Smith’s owner’s manuals describe that temperature primarily as a safety feature that minimizes the risk of scalding.

Which is the best brand water heater?

Havells Geysers.
AO Smith Geysers.
Racold Geysers.
Bajaj Geysers.
Venus Geysers.
Crompton Geysers.
Orient Electric Geysers.

How often should you flush your water heater?

Tip: To maintain the upkeep of your water heater, flush your water heater every six months or so. If you have harder water, or water that contains more minerals, you may want to flush it more often.

How long does a John Wood water heater last?

How Long Does A Tank Water Heater Last? A conventional electric or gas water heater maintains heated water in an insulated storage tank. The average tank lasts 10 – 15 years.

What brand of electric water heater is the most reliable?

A.O. Smith. …
Rheem. Rheem was founded in 1925 by two brothers, Donald and Richard Rheem – and with financial backing from a third brother, William. …
Kenmore. …
Bradford White. …
American Standard. …
American Water Heaters. …
Bosch. …
EcoSmart.

Should I replace my 15 year old water heater?

Anyway, you should consider replacing your water heater if it’s about 6-12+ years old and when you start running out of hot water faster. However, age and lack of hot water aren’t everything. You could have a 15-year-old water heater that works just fine and wouldn’t need replacing.

Can a water heater last 30 years?

Lifespan of Tankless Water Heaters These heaters have an average lifespan of 20 years. However, some can last for up to 30 years when maintained properly. … Tankless water heaters can still corrode over time but this happens much more slowly.

How much should it cost to replace a 40 gallon water heater?

Water heater costs by gallon A standard 40-gallon water heater costs $330 to $1,500 for the unit alone, or $500 to $2,500 including installation labor. *Price for tank unit only, not including installation.

How big of a water heater do I need for a family of 4?

Household size plays a big role in determining the right water heater size. A home with two or fewer people can be served by a 23- to 36-gallon tank. A tank size of 36- to 46-gallons is best for homes of up to four people. A home with five people can be served by a 46- to 56-gallon tank.

How much does it typically cost to replace a hot water heater?

A water heater is an essential home appliance. When the time comes to install a new one, the average water heater replacement cost ranges from $811 to $1,566, with the national average at $1,176. A water heater is an important home appliance that is relied on to provide hot water for bathing, cleaning, and cooking.

How do you read the manufacture date on a water heater?

The year of manufacture is noted by the first letter of the serial number, and the month is the second letter.

Where is the manufacture date on a serial number?

To Determine Manufacture Date Based on Serial Number: The 1st three numbers of your serial number will always provide your manufacture date. The 1st number is the YEAR of manufacture; the 2nd & 3rd numbers indicate the MONTH of manufacture.

How do I find the model number on my read state water heater?

State water heaters have the manufacture date listed in the serial number. The first two digits are the year and the second two are the week of the year. This tank was manufactured on the 24th week of 2009. Older tanks prior to 2004 will use the second and third number listed.

How do you flush a dual water heater?

Turn the Water Heater Off. …
Turn the Cold Water Valve Off. …
Let the water cool. …
Attach a drain or garden hose to the drain valve on the side of the tank. …
Place the end of the hose in a bucket or drain. …
Turn on a faucet (or two) …
Start draining the tank by turning on the drain valve.

Why would a water heater leak from the bottom?

If you find water leaking from the bottom of your water heater or from the nozzle, the source of the problem can be a loose or broken drain valve. If water is leaking from the nozzle of your drain valve, this issue can be fixed with a simple solution that consists of tightening the knob by hand.

How can I make my water heater last longer?

Flush the water heater tank once a year. Almost all water heater manufacturers will recommend flushing the water heater tank annually. …
Check the Anode Rod and Replace it if it’s Badly Corroded. …
Insulate the Hot Water Heater Tank.

How long does it take a plumber to install a water heater?

How Long Does the Installation Take? A certified plumber should be able to remove your old water heater and install the new one in approximately three hours. This time frame is under normal circumstances and with no unforeseen issues occurring.