What does code 12 mean on a Rinnai water heater?
What does code 12 mean on a Rinnai water heater?
flame failure
If you’re getting Rinnai error code 12 on your hot water unit, it indicates that a flame failure has occurred on the system. In this instance, your hot water unit has not recognised that there is a flame in the burner box. Incorrect gas pressure supply your hot water unit.
What is code 11 on a Rinnai heater?
Rinnai fault code 11 – No ignition. Check to make sure the gas is turned on at the water heater, gas meter or tank. Ensure the igniter is operational. Make sure the heat exchanger is not clogged and that low water flow is not causing short cycling.
Why is my Rinnai heater beeping?
A water heater may sound a beep to warn that there is a water leak. Beeping may also signal a gas leak. The green Priority light will glow indicating that this controller is controlling the temperature and that the Rinnai Tankless Water Heater is ready to supply hot water.
Why does my Rinnai Water Heater keep turning itself off?
Hi there, our rinnai dynamo 15 heater keeps turning itself off. We turn it on and it irks for 5 mins then stops…. When its on it is on economy and the number 17 s in the ‘set’ display. What can we d … read more Our gas tank water heater acts as storage and back-up for a Rinnai instantaneous tankless.
Where can I get a Rinnai V1500 water heater?
They can be reached on 1300 555 545. Hello , we have a V1500 unit that works well to the Bathrooms and laundry that are within 6 metres of the water heater. Trying to get hot water to the kitchen sink about 20 metres away has always been a problem in the last 10 yrs.
Is there such a thing as a Rinnai space heater?
I have a Rinnai RHFE-263FA Direct Vent Wall Furance installed in 2004. When the heater is turned on it fires but only lasts about 10 seconds and then quits. I get an error code #12, (flame failure). I … read more I have a model 606A Rinnai space heater and the heater keeps shutting off with the error code 12. The filters are clean. … read more
How to troubleshoot a Rinnai tankless air unit?
Turn off gas valve feeding the appliance. Unplug igniter wire; hold the igniter wire with an insulated pair of pliers about a 1/4″ from a piece of metal. Cycle the unit to ensure you see a spark when unit is cycling.
Why does my Rinnai Water Heater have code 10?
Remove burner and inspect copper fins in heat exchanger for a build up between fins. This will cause air flow restrictions which can lead to code 10’s. If build up is present, you will need an air compressor capable of delivering 120 psi of air to blow out the burner and heat exchanger fins.
Turn off gas valve feeding the appliance. Unplug igniter wire; hold the igniter wire with an insulated pair of pliers about a 1/4″ from a piece of metal. Cycle the unit to ensure you see a spark when unit is cycling.
What should I do if my Rinnai hairdryer is not working?
Within these manuals you will find trouble shooting checklists that may save a service call Checkpower supply (Plug another appliance (ie hairdryer) into power point and test. If a controller is fitted check that it is on also) Check gas supply (Turn gas stove top on then turn hot water tap on.
What to do if your hot water heater is not working?
Checkpower supply (Plug another appliance (ie hairdryer) into power point and test. If a controller is fitted check that it is on also) Check gas supply (Turn gas stove top on then turn hot water tap on. If flame drops on stove this shows it is possibly a gas supply issue)
