What are the error codes for the Bosch washer?
What are the error codes for the Bosch washer?
Bosch WFL 2060UC Washer Error Codes Fault Possible Causes Door open or won’t lock – Door left open. – Faulty door latch or No water filling – Water shut off. – Inlet strainer filte No heating – Faulty heater. – Voltage too low. – Ex No draining – Blocked sensor. – Faulty water level c
What does the E0 code on a Bosch dishwasher mean?
The E0 code is displayed when no fault code is recorded. Repair or Check: Check the water fill level. If water level is low then the heater will not turn on. If water level is correct then the flow switch or the heater could be bad. A heating failure means accessing the heater and requires removing the dishwasher tub.
What does fault code 90 on Bosch water heater mean?
Bosch fault code 90 – Indicates low gas supply pressure. To remove the code, turn the remote control unit off and turn on the hot water tap. Then, press the ‘on’ button on the water temperature controller again. If the fault code remains, you will need to call for service.
What is the error code on my Bosch tankless?
Error code A7 – Outlet temperature sensor fault The outlet temperature sensor reacts when the temperature is either below 36 F when the unit is protected from freezing temperatures, or above 210 F in a case of overheating due to the lime-scale deposits. Check the sensor and wiring. You might have to flush the unit to remove the mineral build-up.
The E0 code is displayed when no fault code is recorded. Repair or Check: Check the water fill level. If water level is low then the heater will not turn on. If water level is correct then the flow switch or the heater could be bad. A heating failure means accessing the heater and requires removing the dishwasher tub.
What causes an E5 error on a Bosch dishwasher?
E5 error occurs when the dishwasher gains more water than necessary, and the water level sensor cannot stop this process in time. So, there are problems with the water level sensor. To eliminate the problem, you have to:
Error code A7 – Outlet temperature sensor fault The outlet temperature sensor reacts when the temperature is either below 36 F when the unit is protected from freezing temperatures, or above 210 F in a case of overheating due to the lime-scale deposits. Check the sensor and wiring. You might have to flush the unit to remove the mineral build-up.
Why is my Bosch washer not turning on?
Close the washing machine door. Tap not turned on. Turn the tap on. Inlet hose kinked or pinched. Eliminate cause. Filter blocked in water inlet hose. Water pressure too low. Eliminate cause. Loose debris is blocking the pump. Drainage pipe and/or drainage hose blocked. Clean drainage pipe and/or drainage hose. Door not closed properly.
What is the phone number for the Bosch dishwasher?
An important message from our CEO Christofer von Nagel. Click here to read. Getting a dishwasher error code that is not listed below? If you couldn’t find your error code on the list, please contact Bosch Customer Service at 1-800-944-2904.
Why do I get an E09 error on my Bosch dishwasher?
The E09 error pops up in particular dishwasher models, where the heating element is located in a circulation pump. The problem can be solved by replacing the heating element, but first, you have to diagnose the device using a multimeter and make sure that it is broken.
