How wide is a closet rod

Most closet rods are 1 1/4 inches wide. This standard diameter gives the rod stability and prevents bending under heavy loads. A wood rod of this diameter is typically supported by a bracket every 34 inches. Angle brackets that mount to the back wall extend forward to support a closet rod that is 1 1/4 inches wide.

What is a normal diameter of a closet rod?

Closet Rod Dowel Diameter A closet-rod dowel is usually between 1 1/4 inches to 1 3/8 inches in diameter. This diameter allows for plenty of hanging strength. It resists breakage, and will not bend when properly supported.

How deep is a closet rod?

Opt for a closet rod depth of at least 12 inches. You can avoid this clothing disaster by mounting the rod at least 12 inches from the rear wall of the closet. Keep in mind that the average closet has a depth of 24 inches.

How wide is a closet rod without support?

NOTE: 48″ maximum width without support brackets. Heavy-Duty Closet Pole 1 Closet Pole Sockets 1 pkg.

How wide is a hanging closet?

Given that hanging clothes take up 2 feet of depth, a 4-foot-wide closet can only accommodate hanging storage along its back wall and one side wall. A closet width of 6 feet allows storage on both side walls as well as the back wall, while still allowing 24 inches of clear space in the center of the closet.

How much space do you need between closet rods?

Standard rod height for a single closet rod is 60 inches, a height that leaves ample hanging space for floor-length dresses. When installing double rods, hang the top rod 80 inches from the floor and the bottom rod 40 inches from the floor. Leave at least 3 feet of space between the two rods.

How thick should closet shelves be?

The minimum thickness you need for shelves is 1/2 inch, but if you plan to load them with heavy items, use 3/4-inch plywood.

How wide is a standard hanger?

Standard-sized adult hangers measure 17-18 inches. Our over-sized hangers measure 19″ wide, giving more support to heavy coats or larger jackets.

How much space should be between rod and shelf?

Measure for the distance away from the wall. A minimum of 10 inches is best, but it’ll depend on the size of your hangers. If there is a shelf above the rod, determine the vertical distance from the rod to the shelf; two inches should be suffice.

Can a closet be 20 inches deep?

When designing a closet, consider the specific efficiencies of each different storage element to better serve your closet needs. The comfortable recommended depth of a closet is 24” (61 cm), but closet depths as narrow as 20” (50.8 cm) can be used if desired.

Article first time published on

What is the average hanging space per person?

Aim for a minimum of 2.4m of wall space per person (without additional bedroom furniture). Allocate 600mm for the widest items you wish to hang, plus an extra 100mm for easy viewing. You’ll need a corridor of at least 800mm as your ‘walk-in’ space.

How much weight can a closet rod hold?

Aluminum Anodized Elite 1-5/16”: Up to 80 lbs. Stainless Steel 1-1/16”: Up to 95 lbs. Steel Polished Chrome Round 1-1/16”: Up to 110 lbs. Steel Polished Chrome Round 1-5/16”: Up to 170 lbs.

How do you install a closet rod in drywall?

1. Measure the size of the space where the closet rod will go.
2. Buy a closet dowel rod and cut it to length.
3. Choose a wall bracket that can be positioned so that you can screw it into wall studs.
4. Mark the place where your first bracket will be installed.
5. Drill pilot holes.

What is a good shelf depth?

The shelves shouldn’t be too deep. The standard depth of most shelves is 16 to 20 inches deep. The highest shelf should be shallower, like 12 inches deep, to make those items easier to access. If you find that stuff seems to get pushed to the back and forgotten about, you should consider even shallower shelves.

How wide should shelves be?

The lowest shelf should be 3 to 4 inches from the floor level. Shelf width or span is determined both by aesthetics and sag considerations. … Shelf depth for a general purpose bookshelf is usually 10 to 12 inches. Shelf spacing will generally range from 7 to 15 inches with 8 to 12 inches being common for bookshelves.

What size are closet shelves?

Most typical closet shelving is 14” deep, partly because that depth works well for most folded clothing but also because that dimension provides excellent yield from the typical sizes of materials that are available to closet manufacturers, which minimizes waste.

How much hanging space do I need?

If you’d like to hang garments in your new storage area, we recommend you allow 55cm – 60cm / 22″ – 24″ of space for adult clothes. This will vary slightly depending on the garment and the size of the hangers you use, but 55cm is the minimum dimension you should aim for!

Is 18 inches deep enough for a closet?

In most places in the U.S., you can’t call it a bedroom if there isn’t a closet. Your building codes may specify minimal dimensions. 24 inches is the standard depth to fit most hangers. 18-20 inches wide was ok in the early 1900’s.

What is the minimum closet size?

Minimum Closet Size Standards and Dimensions. Minimum walk-in bedroom or walk-in coat closet: 4’D x 4’W. However, ideally a walk-in will be at least 72″ wide. The minimum for a walk-in pantry or linen closet: 32″D x 32″W but closer to 72″ width is preferred so that you can wrap standard size shelves along three sides.

What is the minimum depth for a wardrobe?

The minimum depth needed is 650 mm (25 1/2 inches). The standard depth of a wardrobe with hinged doors needs to be 500 mm but with a sliding wardrobe, you have to cater for the top track which is approximately 80 mm.

Do closet rods need studs?

Installing a closet rod in a closet without conveniently located studs is a simple job that requires no special tools or advanced carpentry skills. Closet rods are typically held by flange-type sockets that are attached to the wall, screwed into framing studs.

Do closet walls have studs?

Closet shelves are usually anchored to the wall where the mounting screws can grab wall studs. … If your walls are masonry, you likely don’t have studs at all. You’ll need the proper materials and methods to build a stud-free closet shelf.

How much hanging space do I need in a closet?

Allow 42 inches of vertical space for suits; 60 inches for dresses, and 36 inches for skirts, shirts, blouses, and slacks that are folded over hangers. Of course, allow extra space for future purchases.

How long do closet rods come?

Stacking Closet Rods Typically, this arrangement is used along with shelves stacked in the space beside the rods. Double rods are usually 34 to 48 inches long but may be up to 10 or 12 feet long. The rods stack at a height of 80 and 40 inches along the back wall, providing space to hang shirts and pants comfortably.

How much weight can Rubbermaid shelving hold?

Total Weight Capacity: 350 lbs.