How to adjust Eco flush toilet?

Adjust the flushing mechanism Turn off the water (on ballofix / shut-off tap) and turn the cylinder a half turn to the right to release it. Adjust the settings on the side of the cylinder to adjust the water. (See manual attached to the bag with the screws to the cistern.)

How does a EcoFlush toilet work?

Unlike gravity-assisted toilet systems, WDI EcoFlush pressure-assisted flushing systems “push” waste and water throughout a toilet. By introducing air during the toilet’s flush-to-filling cycle, the EcoFlush pressure-assist system injects an extra level of power into every flush.

Who makes eco flush?

WDI Technology Co Ltd
Ecoflush by WDI Smart Water – WDI Technology Co Ltd.

How many Litres does it take to flush a toilet in South Africa?

9 litres
With South African toilets averaging 9 litres per flush and accounting for up to 70 – 85% of commercial water use in buildings, it’s easy to see why traditional toilet systems have become inefficient for modern use.

How do you fix a flushmate?

Turn off the water supply valve.
Flush the toilet to relieve the pressure.
Disconnect the water supply line from the Supply Shank (A). (
Examine the inlet screen and remove anything that may be blocking the flow of water into the FLUSHMATE® tank.
Reattach water supply line and fully open water supply valve.

What should I do if my dual flush toilet is not working?

If your water level cannot be increased, the Duo Flush system should not be used. Once water level has been set, set both adjustment dials to maximum setting. Place 3 pieces of toilet paper in the bowl and flush, if the bowl evacuates the toilet paper, lower the green dial setting by one number and repeat flush.

How do you know when you need to flush the toilet?

Flush the toilet to determine if you need more or less water. Start off by getting a baseline of your toilet’s flushing mechanism. Press the half flush button, and then the full flush when the tank completely refills. If the flush seems weak, then you need more water.

Why does my toilet flush when the water level is low?

And be gentle because most lever nuts are plastic, and they can easily break. The water level in the toilet tank is controlled by the toilet float, which is adjustable. If the toilet float is set for a water level that’s too low, you’ll get a weak flush. A low water level usually has one of two causes that are easy to fix.

What to do if toilet paper does not flush?

Place 3 pieces of toilet paper in the bowl and flush, if the bowl evacuates the toilet paper, lower the green dial setting by one number and repeat flush. Continue this process until toilet does not evacuate the paper and adjust dial up 1 setting.

How does the Eco flush work on a regular toilet?

The back part of the Eco Flush also holds water like a normal toilet. There are two flush buttons on the cistern like in a conventional dual flush toilet except that with Eco Flush, the small flush will release 300 ml into the front part of the bowl, and the large flush will release 2,5 litres into the entire bowl.

What’s the best way to flush an ecoflush tank?

EcoFlush flush buttons should only be flushed by pressing the button quickly in about 1 second. If you hold down the button longer to flush more water. Carefully remove the lid of the tank. Adjust the length of the screws on the underside of the tank lid adjacent to flush buttons. Shorter screws for less water.

What should I do if my Eco flush valve is not working?

Check water pressure (20 PSI minimum) to flow or tank fill water B. Check Flush Control Valve for leaks. B. Check all connections, Replace if leaks are present will not shut off. C. Air leak. C. Check flush valve cartridge for air leak. D. Pressure regulator is not working. D.

How to adjust Eco flush toilet?