How much does it cost to have a plumber install a new shower valve?

The average cost to replace a shower valve is $310 if you hire a plumber to replace the stem and internal parts. An entire shower valve replacement costs are closer to $540 installed, on average, which includes removing the old broken valve, the cost of the new valve, as well as any other parts and labor costs.

How do you replace a Symmons shower valve?

How to Change a Symmons Shower Mixing Valve

Turn off the valves in the water lines leading to the shower faucet.
Turn the valve approximately half a turn.
Unscrew the cap assembly counterclockwise with an adjustable wrench.
Install the replacement mixing valve by turning into the faucet in a clockwise direction.

How do you adjust a Symmons pressure balancing shower valve?

Adjusting a Symmons Shower Valve To access the pressure-balancing mechanism on a Symmons shower valve, use a hex key or Phillips screwdriver to loosen the setscrew on the handle and then pull off the handle. Twist the decorative cap over the cartridge counterclockwise to remove it.

What do you need to install a Symmons shower valve?

Having the proper tools is often the first step to a proper plumbing installation. Tools needed for the installation of a Symmons Temptrol shower valve include a Phillips screwdriver, tubing cutter, plumber’s tape, adjustable wrench, locking pliers, measuring tape, and soldering equipment.

How to install a tub and shower system?

1. Install piping and fittings with valve body as shown in Figure 2 or 3. IMPORTANT: Valve rough-in is 2-3/8” +/- 1/2” from CENTERLINE OF SUPPLIES TO FACE OF FINISH WALL. Install so that line indicated on rough-in plaster shield on valve is flush with finish wall as shown in Figure 1. Tub/Shower System (Figure 2) Model A

What are the specifications for a Symmons shower head?

Symmons valves and shower heads comply to all known standards, codes and specifications: CSA B-125, ANSI A112.18.1M, ASSE 1016, EPA ‘92 etc. Symmons shower heads are equipped with a 2.5 GPM (9.5 L/min) water and energy saving flow restrictor..

What’s the best way to replace a shower valve?

Turn off the water. Disassemble the shower handle, and remove the cartridge. Took the cartridge to the hardware, and found the proper replacement part with the help of a salesperson. There were several Moen options. Install the new cartridge following the written instructions that came with the part, and reassemble the shower handle.

What kind of mixing valve does a Symmons tub use?

The legendary Temptrol pressure-balancing, anti-scald mixing valve is the heart of every Symmons tub and shower system, and it is the benchmark by which all others are judged.

What kind of valve do I need for my shower?

Tub/Shower System:The valve in this system has a built-in choke for use with a diverter spout. Follow piping instructions for Model A valve. Shower System:Pipe shower head from outlet marked “S”. Install either the included copper sweat or 1/2”-14 NPT plug (pipe sealer required) into the outlet marked “T” (see figure 3A).

How much does it cost to have a plumber install a new shower valve?