How long until you can move furniture on refinished floors

Wait 48 to 72 hours after the hardwood has been refinished/ finished before “PLACING” furniture back in its place. Keep a steady temperature and humidity within your home. Dramatic swings in temperature will cause hardwood to shrink or to cup. Sweep/dust and mop often.

When can you put furniture back after refinishing hardwood floors?

So when should you put furniture on refinished hardwood floors? Well, ideally, you should wait 4 days to move the furniture back in. 4 days is enough time to allow the floor dry and cure naturally. When moving furniture back, avoid pulling or dragging it.

How long after oil based polyurethane can I put furniture?

Oil polyurethane – Furniture after minimum 3 days. No area rugs for 14 days. Hardwax Oil finish – Furniture can go back onto the floors in 36 hours.

How long should polyurethane dry before moving furniture?

After finishing your hardwood flooring with water-based polyurethane you should wait 2 to 4 hours before walking on them (ideally longer) and you should not move furniture back for at least two days, (72 hours would be better).

How long before you can put furniture on varnished floors?

On average, you must wait at least 24 hours before you can move around lightly on your floor. On the other hand, if you’ve opted for an oil-based varnish, don’t move on your freshly restored floor for a period of 48 hours.

When Can Cats walk on refinished hardwood floors?

A: Cats can be on the floors after around 48 hours. Dogs on the other had, we recommend that they stay off the floors for up to two weeks. The reason being their nails can be harsh on the new finish while setting up.

How long after water based polyurethane can I put furniture?

Length of time to dry for water borne polyurethane: After 2 days, you can move furniture back. 1 week after dogs can walk on the floor (unless you get Doggie Socks which you can buy on Amazon). It takes a full 30 days for the floors to cure, so it’s ideal to wait 30 days before putting area rugs on the surface.

How long before dogs can walk on polyurethane floors?

Length of time to dry for water based polyurethane: Avoid shoes and bare feet. And, make sure your pets don’t walk on the floors during this interval. After 2 days, you can move furniture back. It takes a full 30 days for the floors to cure, so it’s ideal to wait 30 days before putting area rugs on the surface.

How long does Polyurethane take to cure?

Oil Based Polyurethane Curing Time Oil-based polyurethane takes anywhere from 4 hours to 24 hours to dry, depending on the formula. It requires at least 30 days to cure fully. Fast-drying polyurethane might cure in 21 days, but weather conditions might delay it.

How long does it take for refinished floors to dry?

Drying time after the floors are refinished: At a minimum, you should wait at least 24 hrs before walking on the floors; for hours 24-48, it’s best to wear socks only (no shoes, no bare feet). Ideally, you should wait a total of 4 days before moving furniture back.

Article first time published on

How many coats of polyurethane should you put on a hardwood floor?

You should apply at least three coats of polyurethane on hardwood floors. Of course, this will depend on the type of polyurethane you are using. Oil-based polyurethane will rarely need more than three coats on floors. Hardwood floors are high traffic areas, so you need a nice, thick layer to protect the wood for years.

How long do you have to stay off stained floors?

While stain brands recommend a drying time of 12 to 24 hours, allowing the floor to dry between 24 and 48 hours ensures that it is completely dry before applying the water-based polyurethane — especially when conditions are less than ideal.

How do you protect newly refinished hardwood floors?

Wait to cover the floors So, for two weeks, don’t cover the floor(s) with rugs, or anything else (such as cardboard boxes during a move). An exception is when construction is still going on. In that case, cover the flooring with soft rugs, sheets, blankets, etc., during the day but take them up at night.

How long should dogs stay off refinished hardwood floors?

Dogs should stay off refinished hardwood floors for at least 24 hours. This will be the amount of time that an oil-based polyurethane coat needs to dry all the way. If you plan on adding more coats, you will need to keep your dog off of your refinished hardwood floor for however many days they need to dry.

How long does it take for Swedish finish to cure?

Long Cure Time: Swedish finishes dry fast but can take 30 – 90 days to fully cure. This means that while the floor may not be sticky to the touch (“dry”), the finish continues to off-gas, emitting toxic chemicals into the air while curing.

Is 2 coats of polyurethane enough?

2 coats of polyurethane are enough to protect the wood from moisture and contaminants. However, for added protection against water damage, about three or four coats of polyurethane would suffice.

How long should I wait to apply a second coat of polyurethane?

Additional coats will adhere to the previous coats rather than soak into the wood, so they may take longer to dry. You should typically wait about 2 hours between coats of water-based polyurethanes and about 8 hours between coats of oil-based polyurethane before applying additional coats.

Why do you have to sand between coats of polyurethane?

The main reason to sand polyurethane between coats is to level dust nibs and other flaws, not to create a better bond. This is demonstrated here by the gloss remaining in the pores after sanding the surface. The next coat of finish still bonds in the pores even though the finish there is rarely scuffed.

How long does satin polyurethane take to dry?

Sheens:gloss, semi-gloss, satinLocation:interior wood surfacesRecoat:after 4-6 hoursDry Time:24 hours before light useCleanup:mineral spirits or paint thinner

Can you buff a polyurethane floor?

Simply give your polyurethane finish a good buffing with a new 180 or 220 grit screen. This will remove flaws such as brush marks, lap marks, bubbles, raised grain and any particles left on the polyurethane finish.

How bad is breathing in polyurethane?

When left uncured, polyurethane can cause asthma and other breathing problems. Those who spend time in rooms that have uncured polyurethane floor treatments may also experience health issues like throat and eye irritation, nausea, vomiting, headaches, coughing, and shortness of breath.

How many square feet will one gallon of polyurethane cover?

One gallon of polyurethane covers 350 square feet.

What is the best time of year to refinish hardwood floors?

If I had to pick an ideal time, I would say spring or fall when the indoor temperature is most consistent with outdoor temperature and it’s often easy to open the windows (after the work is complete) to help air out the smell faster. But, really, sanding and refinishing hardwood can take place any time of year.

How often do hardwood floors need to be resealed?

Generally, you should recoat every 3-5 years, depending on the amount of use your floors see. You’ll know it’s time to recoat when the floor looks dull and there are light scratches in the finish that aren’t removed by a deep clean and polish.

Is polyurethane bad for dogs?

“Polyurethane glues can actually expand in the stomach in cats and dogs,” Dr. Wismer cautions. This can lead to foreign body obstruction in the stomach and will require surgery.