How do you unclog a stubborn bathtub drain?

If you’re not a fan of using chemicals, this all-natural solution may help to unclog a bathtub drain. Start by pouring one cup of baking soda down the drain and let it settle for at least five to 10 minutes. Next, pour a cup of white vinegar down the drain and allow the mixture to work its magic.

Why can’t I unclog my bathtub?

You can also try a baking soda and vinegar mixture to clean out clogged bathtub drains. First, pour boiling water down the pipe. Then pour in about half a cup of baking soda followed by a cup of white vinegar into the drain. When baking soda and vinegar are mixed, they create a chemical reaction that foams up.

Can I use Drano For Clogged bathtub?

Drano® Clog Removers can unclog a drain fast. You can use Drano® Clog Removers to unclog a kitchen sink, bathroom sink, shower or clogged bathtub, but DO NOT use them in toilets. For clogged or slow-running drains, apply the product and let it work 15 minutes, then flush with hot water.

What to do when the tub stopper doesn’t work?

Once enough water fills the tub, the suction from beneath the drain and the weight of the water should keep the lid against the drain enough to keep water in the tub when the stopper doesn’t work. A plastic bag filled with water and sealed makes a quick drain plug.

How do you unclog a tub with a plunger?

Remove the stopper of the bottom (main) tub drain. You may have to unscrew it or turn it back and forth a little while pulling up. Fill the tub with about one to two inches of hot water (not cold). Hot water helps dissolve soap in clogs. Place the cup plunger over the drain so the entire lip…

How do you remove a drain stopper from a tub?

The toggle lever expands the shaft of the stopper to seal a pair of O-rings and block the drain. With the stopper in the open position, simply grasp the plug by hand and pull upwards with a wiggling motion to remove it from the drain opening.

Why is my bathtub drain stopper not working?

Terry Williams/Photographer’s Choice/Getty Images. When a bathtub drain stopper fails to hold water when closed, or when the tub drains too slowly when the stopper is in the open position, the culprit is usually a hair or soap buildup on the stopper, or a stopper that is worn out and in need of replacement.

Can you fix a bathtub drain with a plunger?

The challenge with fixing a bathtub drain with a plunger is that tubs essentially have two drains. There’s the familiar one at the bottom of the tub that you close to fill up the tub with water.

Where does the water go when you plunge the tub?

Some overflow drains have visible holes or other features, but they all do the same thing. The water entering the overflow drain goes into a pipe that feeds into the main tub drain. This presents a problem when you need to plunge the tub.

Where is the overflow drain in a tub?

There’s the familiar one at the bottom of the tub that you close to fill up the tub with water. But there’s also one higher up on the front wall of the tub, in line with the faucet spout and the bottom drain. This is called the overflow drain.

How do you unclog a stubborn bathtub drain?