How do you turn off a Moen Flo?
How do you turn off a Moen Flo?
How do I turn on / off my water through the Flo by Moen App?
- Select your Location.
- Select your Device.
- Tap or slide the on / off switch at the bottom of the screen to allow water to flow back into the home.
How do you reset a Moen Flo?
On your Smart Water Shutoff, press and hold the “Reset” button for 20 seconds. After 20 seconds, once the STATUS LED starts blinking quickly (LED located on the left side), let go of the button. Allow 1 minute for the device to reboot.
Where is a water shut off valve?
The valve is typically located within 3 to 5 feet of where the water main enters the home. If you don’t find it on the front wall, check for a mechanical room, or near the water heater or furnace. In a crawl space or with slab construction, the shutoff valve may be right inside the crawl space.
How does the Flo by Moen water shutoff work?
Smart Water Shutoff The Smart Water Shutoff is installed on a home’s main water supply line and connects to the Flo by Moen™ App to provide homeowners with a preventative approach to leak detection and protection against costly water damage.
How to protect your home with Flo by Moen?
Whole-Home Protection 1 Add An Automatic Shut-Off. Installed on the main water supply line to your home, one Smart Water Shutoff monitors your plumbing pressure, flow rate, and area temperature to identify leaks 2 Catch Leaky Toilets. 3 Keep Your Garage Dry. 4 Protect Your Bonus Rooms. 5 Flo by Moen App. …
Can a Flo by Moen be used on a fire sprinkler system?
DO NOT install the Flo by Moen Smart Water Shutoff on fire sprinkler or suppression systems and hot water distribution lines. *NOTE: Some homes may not have a Pressure Reducing Valve “PRV.”
Where to put a Flo by Moen Smart Water Detector?
Our Smart Water Detectors also monitor temperature and humidity levels. Use the App to customize alerts for children’s rooms or guest bedrooms. Place a Smart Water Detector near a water heater, under your work bench or add the Leak Sensing Cable to catch any liquid spills, drips, or leaks in your garage.
Smart Water Shutoff The Smart Water Shutoff is installed on a home’s main water supply line and connects to the Flo by Moen™ App to provide homeowners with a preventative approach to leak detection and protection against costly water damage.
Whole-Home Protection 1 Add An Automatic Shut-Off. Installed on the main water supply line to your home, one Smart Water Shutoff monitors your plumbing pressure, flow rate, and area temperature to identify leaks 2 Catch Leaky Toilets. 3 Keep Your Garage Dry. 4 Protect Your Bonus Rooms. 5 Flo by Moen App.
DO NOT install the Flo by Moen Smart Water Shutoff on fire sprinkler or suppression systems and hot water distribution lines. *NOTE: Some homes may not have a Pressure Reducing Valve “PRV.”
Our Smart Water Detectors also monitor temperature and humidity levels. Use the App to customize alerts for children’s rooms or guest bedrooms. Place a Smart Water Detector near a water heater, under your work bench or add the Leak Sensing Cable to catch any liquid spills, drips, or leaks in your garage.
