How do you reset a Drayton Digistat?
How do you reset a Drayton Digistat?
how to reset drayton digistat thermostat
- 1st open the draws on the wireless room stat.
- replace the 4 AA battery’s but do not close the draws.
- take it to within 1 metre of the receiver.
- Turn the mains off then on again.
- Press button 1 hold it.
- Press button 2 until the red light flashes(learn mode)
How do I reset my Drayton Digistat rf2?
Is Iflo a Drayton?
There are various manufacturers of zone valves. Honeywell is a common one and Drayton is another, sometimes branded as ‘iflo’.
How do I reset my Drayton thermostat?
How do I reset my Drayton thermostat?
- 1st open the draws on the wireless room stat.
- replace the 4 AA battery’s but do not close the draws.
- take it to within 1 metre of the receiver.
- Turn the mains off then on again.
- Press button 1 hold it.
- Press button 2 until the red light flashes(learn mode)
How do you reset a Drayton Digistat 2?
How to reset a Drayton Digistat 2 thermastat?
- Can you help?
- press select and – together for 2 seconds and it resets the stat to preset factory settings.
- If you press the SELECT and – Keys at the same time for 2 seconds it resets the unit to the default settings.
What kind of thermostat does Drayton use?
Drayton’s stylish Digistat+ wired room thermostat with tactile, audible & visual feedback. Featuring a familiar dial control with a digital display to show that the temperature has been set accurately every time. Designed for fixed wiring only, to comply with current IET wiring regulations (BS7671).
What kind of Dial Control does Drayton digistat have?
Featuring a familiar dial control with a digital display to show that the temperature has been set accurately every time. Drayton’s new Digistat 2290B is battery-powered giving a two-wire connection to the boiler with 3A relay. Drayton’s new Digistat 2290M is mains-powered with 16A relay and OpenTherm outputs.
What kind of boiler control does Drayton make?
Alongside these, we also design and manufacture boiler clip-in controls, pipe thermosats and cylinder thermostats. Drayton’s stylish Digistat+ wired room thermostat with tactile, audible & visual feedback.
Where to place a digistat programmable room thermostat?
For the best performance install in an open space, at least 30cm distance from any metal objects including wall boxes and boiler housing. It is recommended that the SCR is mounted on the wall nearest the final location of the Digistat+RF programmable room thermostat and not less than 30cm from the boiler side panel.
