How do you move a drain line for a washing machine?
How do you move a drain line for a washing machine?
Glue a P-trap to the drain at the location of the washer. The bottom of the trap should be 12 inches from the floor. Glue a vertical length of 2-inch pipe to the trap opening and extend it at least 2 feet above the bottom of the trap. This is the drain standpipe.
Do you need a water line for a washing machine?
Make sure that the water supply lines are connected to the right tap. But if you have a relatively new washer, it will probably need the cold supply line only. Get the rest of the instructions on washing machine installation here. We hope that our blog today has showed the proper way of plumbing washing machine drain.
What kind of drain pipe do you need for a washing machine?
Attach an ABS pipe measuring two inches long to the wall (where the washing machine will be installed). There should also be an outlet from a two-inch sanitary tee that’ll face upward. This one’s going to be connected to the vent pipe.
What kind of machine do you use to clean drain?
Hand-powered: Some styles have a hand auger that you spin with your hand to move the cable through your drain. Drill-powered: You can hook up a standard variable speed drill to the machine, then use the rotational speed of the drill to move the cable.
Glue a P-trap to the drain at the location of the washer. The bottom of the trap should be 12 inches from the floor. Glue a vertical length of 2-inch pipe to the trap opening and extend it at least 2 feet above the bottom of the trap. This is the drain standpipe.
Where can I buy a water supply line for a toilet?
On Lowes.com, filter water supply lines by use, such as in faucets or toilets. You can also shop by inlet fitting end type, so whether you have a compression, push, pipe thread or other fitting, you’ll find one compatible with your project.
Hand-powered: Some styles have a hand auger that you spin with your hand to move the cable through your drain. Drill-powered: You can hook up a standard variable speed drill to the machine, then use the rotational speed of the drill to move the cable.
How big of a drum do you need for a drain line?
Wide four point base for greater stability, and interlocking tubular construction also gives it excellent durability Drum can hold 25 ft. of 5/16″ cable for 1-1/2″ and 2″ lines, or 35 ft. of 3/8″ cable for 2″ and 3″ drain lines
