How do you enlarge a granite countertop cutout?

Switch to a 4-inch angle grinder to cut the countertop in areas where there is not enough room to use the circular saw. Increase the size of your cooktop by cutting a larger hole in your granite counter for installation.

Can existing granite countertops be recut?

After many years in the countertop industry, we’ve come across many homeowners asking if their granite countertop can be cut or modified to fit their new cooktop, fridge or new sink. Surprisingly, the answer is yes, this can be achieved, with the help from SurfaceLink of course!

How do you recut a granite countertop?

Steps for Cutting Granite

Set up granite on a stable work surface and clamp it down.
Measure and mark the cut line.
If using a circular saw, blue-tape the shoe of the saw to minimize the risk of metal-on-granite scratching.
If using a grinder DO NOT remove the guard.
Set up a straightedge guide like a shoot board.

How much does it cost to cut granite for a cooktop?

How much does it cost to cut granite? Although it can cost $300 to $500 to cut this stone, installers include granite fabrication services in their labor rate.

Is it easy to cut granite?

Granite is a hard rock that’s tough to cut through, but you don’t need to be a stonemason to cut it yourself. With a circular saw and a diamond-cut blade, you can make clean and precise cuts. As long as you take the right precautions, you can turn cutting granite into a safe and enjoyable DIY project.

Can you cut and reuse granite countertops?

If you are reusing your granite countertops for your kitchen or bathroom remodel, you’re limited to use your existing design so the granite will blend into the new space. This is especially crucial if you have granite cut outs around your sink.

Can you cut things on granite countertops?

Additionally, cutting on stone counters can dull your knives, slowing your dinnertime prep and increasing your risk of lacerations. To protect your counters and your knives, avoid chopping vegetables and butchering meat directly on the surface of your granite. Instead, protect the surface with a large cutting board.

How big of an opening do I need for a new granite countertop?

All the new cooktop models available (even the 30″ size that my old cooktop supposedly is) require the rough opening in the countertop to be about 1/2″ to 1″ larger on each side than the existing hole in my granite counter. There’s enough room to cut it larger within the cabinets, but can it be cut in place?

How to increase the size of a cooktop cutout in?

Increasing the size of your cooktop cutout in a granite slab countertop requires the same cutting process used to create the original cutout. As long as you have a template of the larger cooktop, all that’s required to create the new opening is a circular saw and a power sander.

What’s the best way to make a cut out for a granite countertop?

Cut through the marble granite, or a tile countertop with a specialized rotary cutter, fitted with a bit suited to the material. Use the power sander to smooth and slightly round off all the interior edges of the cut-out. Curve the sharp interior corners by about two degrees with the power router, to prevent heat from cracking the countertop.

Is it necessary to re-cut granite in place?

If one considers the difficulty and cost of getting a stone-guy to come and do the work, the mess, the time to either rig dust-containment or deal with the inevitable fine dust everywhere, and installation of the new cooktop, this can’t pencil out.

How big of a cut out do I need for a countertop?

Install these three inches apart from the outside edge to 1-1/8 inch away from either side of the expanded cutout size. If the countertop is already on a floating framework like this, proceed to step two.

How do you enlarge a granite countertop cutout?