How do you clear an obstruction in a pilot tube?
How do you clear an obstruction in a pilot tube?
You can clear the pilot orifice with a piece of wire or a wire brush, and it isn’t difficult to access.
- Remove the cover plate at the bottom of the water heater.
- Turn the gas control to the “Off” position.
- Locate the pilot tube.
- Clean the pilot hole by brushing it with a stiff wire brush.
What happens if the pilot light is not lit?
Once the thermocouple detects that the pilot light isn’t lit, it turns the gas off as a safety measure. An unlit pilot can also stem from a dirty thermocouple as the dirt may be obstructing the current signal, which would also lead to a gas outage.
Why is the pilot light not working on my water heater?
If the engineer finds any other faults with the water heater, it might be more cost-effective to get a new one. The pilot light is the tiny flame inside the boiler that ignites the gas, which then consequently heats the water. When it goes out, there is no hot water and no heating.
How do you turn off the pilot light?
Press and hold the pilot control knob down until the flame lights. Remove the match, but continue to hold the knob down for 30 seconds before releasing it. If the pilot light flame does not stay lit after releasing the knob, repeat the process.
How do you light the pilot light on a gas fireplace?
Remove the front cover of the appliance to access the pilot light area. Some appliances, such as a gas fireplace, may have an open pilot light area. Use a screwdriver to remove the screws to open the panel if needed. Turn the pilot control knob to the “pilot” position. Light a match and hold it directly beneath the tube in the pilot opening.
Once the thermocouple detects that the pilot light isn’t lit, it turns the gas off as a safety measure. An unlit pilot can also stem from a dirty thermocouple as the dirt may be obstructing the current signal, which would also lead to a gas outage.
What should I do if my water heater pilot light won’t come on?
Ignite the flame with a long match while switching the knob to “pilot,” hold it in the position for 35 seconds. Once the pilot comes on, turn the knob back to “on.” If the above procedure proves futile, repeat the process, and elongate the waiting time to 60 seconds.
Press and hold the pilot control knob down until the flame lights. Remove the match, but continue to hold the knob down for 30 seconds before releasing it. If the pilot light flame does not stay lit after releasing the knob, repeat the process.
How does the pilot light on a gas range work?
On some gas-powered appliances — such as gas ranges, water heaters, boilers and gas fireplaces — the pilot light works to ignite the main flame when the gas is switched on to the burner by the regulating valve. If the pilot light is not lit, the gas burner will not ignite,…
