How do you adjust a Kohler shower diverter?
How do you adjust a Kohler shower diverter?
Rotate the valve stem clockwise to turn the water on. Test the water temperature with a thermometer. When the desired water temperature has been reached, replace the red or black collar on the valve stem. Turn the stem counterclockwise to turn the water off.
How do I turn off the shower diverter?
Pry off the screw cover plate on the center diverter handle; use a thin flat-head screwdriver to pry with. Remove the screw underneath the plate by turning it counterclockwise. Pull off the diverter handle.
How do you remove a Kohler shower diverter?
Unthread the knob from the end of the diverter button. Using a flat-blade screwdriver, hold the diverter stem in place while unthreading the diverter button. Unthread and remove the diverter button. Unthread and remove the diverter sleeve.
Why is my shower diverter not working properly?
Common Problems with Diverter Valves. As tub diverter valves age, they become worn. Sediment also builds up, causing the valve to malfunction. If the valve cannot turn all the way to block the tub faucet, there will be less pressure to push the water up the pipe to the shower and water will be coming from both the shower and the faucet.
How do you take a diverter valve out of a shower?
The valve assembly can be easily taken apart and cleaned. Pry the cap off the top of the faucet handle and loosen the screw. After removing the handle, you can see the diverter valve. To take out the valve, unscrew the valve assembly from the nut located on the stem.
Why does water come out of my shower when I Turn Off the shower?
Whenever the diverter valve does not close all the way, regardless of the reason, the pressure pushing water to the shower head will be weakened and water will come out both the faucet and the shower head. The valve assembly can be easily taken apart and cleaned. Pry the cap off the top of the faucet handle and loosen the screw.
How is the water diverted from the tub to the shower?
In the shower-tub combination, a knob is turned or a level is pulled to switch the water flow back and forth between the tub and the shower. For example, you turn the water on and it comes out of the faucet into the tub; you turn the knob or pull the lever and the water is diverted to the shower head.
How do you remove the diverter button on a Kohler shower?
Diverter buttons can be removed one of three ways. Follow the appropriate instructions below to remove your diverter button. You may need the following tools to remove your diverter button: 1/16” hex wrench, flat-blade screwdriver, and a pliers. Unthread the knob from the end of the diverter button.
Why is my shower diverter not shutting off?
Below are some of the things that you should check when troubleshooting the problem on your diverter valve. A loose inside nut can cause the water to flow freely from the shower head even after you shut off the diverter valve. To fix this condition, tighten the inside nut until the water stops leaking from the shower head.
When to replace a stuck shower faucet diverter?
Replacement Shower Faucet Diverter. If the shower faucet diverter is stuck because the washers are old and have broken or the plastic valve diverter inside the pipe has broken, then it is time to replace the faucet itself. The diverter is not an overly expensive mechanism to buy and replacing it may be easier than attempting to fix it.
What does a shower diverter valve do for You?
A shower diverter valve enables you to control the amount of water that goes into separate outlets on the shower head. Most types of valves have one, two or three outlets and they may be fitted into handheld or wall mounted shower heads.
