How do I reset my Toro sprinkler timer?

How do I reset my Toro sprinkler timer?

How to Reset a Sprinkler System

1. Turn the control dial to the “off” position.
2. Press the “next” button to access the clear-memory feature.
3. Press and hold the “off” button until the display stops blinking.
4. Turn the control dial to the “run” position.
5. Press and hold down the “minus” arrow and “prog” buttons simultaneously.

What are the components of the Toro timer?

CURRENT TIME/DAY– Enables the clock time and day to be set. WATERING DAYS– Enables the watering day schedules to be set and reviewed. START TIMES– Enables the program start times to be set and reviewed. SET ZONE TIMES– Enables the watering zone run time to be set and reviewed. (continued) 3 Timer Components 3 – Control Dial Positions (continued)

What kind of wire do you need for Toro irrigation?

1. Route the valve control wires between the valves and the timer. Note:The snap-in wire connectors accept 14 to 18 gauge wire. Using 18-gauge, multi-strand, direct-burial irrigation cable is recommended. Choose a cable that has at least one more wire conductor than the number of valves to be connected. 2.

Which is the normal dial position in Toro?

RUN– The normal dial position for all automatic and manual operations. CURRENT TIME/DAY– Enables the clock time and day to be set. WATERING DAYS– Enables the watering day schedules to be set and reviewed. START TIMES– Enables the program start times to be set and reviewed. SET ZONE TIMES– Enables the watering zone run time to be set and reviewed.

What does manual operation do on Toro sprinkler?

Manual Operation   Manual operation enables the automatic watering pro- Flashing grams or selected zones assigned to the program to be started manually.

How to install an indoor Toro ecxtra sprinkler timer?

Indoor Model Installation   1. Select a location for the timer within 4′ (1,2m) of an electrical outlet to enable the transformer cord to easily reach. You will need this information when connecting Valve Common Wire the valve wires to the timer.

CURRENT TIME/DAY– Enables the clock time and day to be set. WATERING DAYS– Enables the watering day schedules to be set and reviewed. START TIMES– Enables the program start times to be set and reviewed. SET ZONE TIMES– Enables the watering zone run time to be set and reviewed. (continued) 3 Timer Components 3 – Control Dial Positions (continued)

How does season adjust work on Toro ecxtra?

The Season Adjust feature enables you to change the run time of all zones assigned to a program, simultaneously up or down, in 10% increments –… Turning Off the ECXTRA   When the control dial is turned to the position, the timer immediately shuts off any watering operation cur- rently in progress.