How do I reset my TBOX

To perform a factory reset hold the reset button on the bottom of the T-Box for around 15 seconds, the light on the front of the T-Box should flash 3 times and you will be returned to the welcome screen. You will then be prompted to begin the setup again.

How do I reset my TBOX remote?

Press the number on the remote as displayed on the TV, if no response from T-Box then press and hold number ‘1’ and ‘7’ on the remote at the same time for a period of 5 seconds (this will unpair the remote and reset the remote), now press the same number as displayed on the TV, press it again to confirm the action and …

How do I pair my new TBOX remote?

With the T-Box powered on, press the reset button on the underside of the T-Box twice. The pairing screen should be displayed, please follow the on screen instructions to pair.

Where is reset button on Telstra TV?

The reset button can be located on the back on the device just under the power cable. To factory reset the Teltra TV2, press and hold the small button labelled Reset, on the bottom of the device, for at least 20 seconds to initiate a factory reset.

Why is my Telstra box not working?

If you’ve tried turning on your Telstra TV but it’s not working: Make sure the cords and connections are firmly plugged in. Turn your Telstra TV off at the power point, wait 20 seconds and then turn it on again. If the Telstra TV is getting power, the LED on the front of the Telstra TV will light up.

How do I pair my Telstra TBOX remote?

Push and hold the Reset Button until the LED on the front flashes Twice. This will allow you to repair your remote or pair a new remote control. Push and hold the Reset Button until the LED on the front flashes Once.

How do I reset my Telstra TBOX?

To perform a factory reset hold the reset button on the bottom of the T-Box for around 15 seconds, the light on the front of the T-Box should flash 3 times and you will be returned to the welcome screen. You will then be prompted to begin the setup again.

How do I get my Telstra TV to work?

Use your Telstra TV remote to select Wi-Fi connection.
Select your home Wi-Fi network from the list.
Press OK on your Telstra TV remote control.
Enter your Wi-Fi password, if required.

How do I update my Telstra TV on Roku?

All devices will automatically update overnight. However a manual software update can be completed via the settings menu for those wanting to receive the update earlier (Home Menu > Settings > System > Software Update > Check Now).

How do I clear the cache on my Telstra TV box?

Open Settings.
>Go to App Management and App List.
Here you will find a list of all your apps. Select the one you wish to clear.
Once you’ve tapped your selected app, tap Storage Usage and Clear Cache.

Article first time published on

Can you use TBOX without Telstra?

Re: T-Box functionality without a Telstra internet connection. Hi FatAido, you can still use your T-Box as a digital set top box but other features will be very limited. As the TV guide will only give you the current show and the next up, things like series recording etc will no longer work.

How do I connect my Telstra TV to the Internet without the remote?

Re: Can I connect my Telstra tv without the remote? You could try plugging the Telstra TV directly in to your modem via ethernet cable. It might let you access it that way. Never be afraid to back yourself when trying new things, just always make sure you have 3 escape routes if things go wrong.

How do I connect my phone to Telstra TV?

Turn on both devices and set them near each other.
Under Settings, select ‘Bluetooth’ option.
Select ‘Scan for Devices’
Select the device you want to pair with.
You’ll receive confirmation when the devices are paired.

Why is my Telstra TV not connecting to the Internet?

Try resetting both the modem and the Telstra TV. To do this unplug power to both for at least 5 seconds then replug them into power. … If that does not work then try plugging an ethernet cable into both the modem and Telstra TV. Now go and connect by Ethernet.

Why is my Telstra TV black and white?

It may be caused by an issue with the device, an error with the application or an issue with the broadcast platform. If the speed is below 3Mbps, you may need to contact your internet service provider. Confirm your Ethernet cable is secure in the back of your Telstra TV for most stable internet connection.

How do I turn on my Telstra TV box?

Open the URL on your computer, tablet or smartphone.
Enter in the activation code you see on your TV screen.
Once the code matches, enter in your Telstra ID username and password.
If your Telstra TV has a tuner, select My antenna is connected.

What replaced the T box?

The T-Box was replaced by the tiny Telstra TV streaming puck, which scrapped both the digital TV tuner and support for streaming Foxtel. Instead the Telstra TV embraced subscription video, offering access to Netflix, Presto and Stan (co-owned by Fairfax Media) along with Catch Up TV and movie rentals.

What shows are on Telstra TV?

Chucky. 2021MA15+ …
American Crime Story. 2018MA15+ …
Brooklyn Nine-Nine. 2020M. …
Devils. 2021M. …
Mare of Easttown. 2021MA15+ …
Mayans M.C. 2021MA15+ …
Snowfall. 2019MA15+ …
The Blacklist. 2020MA15+

How do I record on Telstra tv3?

Telstra TV does not have the ability to set recording for movies and TV shows. However, with Live Pause you are able to pause and rewind free-to-air live TV for up to 30 minutes.

Do I need to update my Telstra TV?

You shouldn’t have to repeat the log in process each time you watch 9Now shows. If you’re asked to repeat the process on your Telstra TV you may need to update the Telstra TV software.

Can I upgrade my Telstra TV?

You will need to contact Telstra. If it is still under warranty (<2 years old), then it should be replaced, if not you will need to purchase a new one (note: if it’s the power supply from the wall that is faulty, you might be able to get a new one from somewhere like Officeworks or Jaycar).

How do I connect my TBOX to my TV?

Using the Mini DIN to composite cable, connect the round black plug to your T-Box device. Connect the YELLOW video cable to the TV video input and the RED/WHITE audio cable to the TV audio inputs. Turn on your TV, then plug your T-Box® device into a power source with the power cord supplied, and switch it on.

Can you use Telstra TV without Telstra?

Telstra TV is no longer tethered to Telstra broadband connections, but you still need a Telstra ID. Telstra has made a small but welcome change to its Telstra TV program – any Telstra customer can now buy the device and use it on their own broadband connection, regardless of their home ISP.

Why does my Telstra TV keep disconnecting?

It could be a faulty modem, or it could be interference caused by another device near either unit (or between them – microwave ovens can wreak havoc on wifi for example). Never be afraid to back yourself when trying new things, just always make sure you have 3 escape routes if things go wrong.

How do you get fetch?

There are two ways to get Fetch TV in your home: through a participating NBN provider, or via selected retailers. For those who’d prefer Fetch TV bundled with an NBN plan, it’s included with selected plans from iiNet, Optus, iPrimus and Aussie Broadband.

Can I still use Telstra TV with another provider?

Re: Telstra TV with another ISP @DeeGee Yes, they will continue to work with any ISP now. Telstra TV Box Office will not be data free though (Although most go on an unlimited plan anyway).

What's the difference between Telstra TV 2 and 3?

The Telstra TV 3 can do pretty much the same functions as its predecessor, the Telstra TV 2. It has the free to air channels apps such as 7plus, 9Now, 10 Play, ABC iView and SBS On Demand apps. … The Telstra TV 3 does also give you the option to watch live free to air channels, but sadly not the option to record them.

Can I use my Iphone as a remote for Telstra TV?

Can’t reach the remote? Telstra TV app can help! Pair Telstra TV app with your Telstra TV to use your phone as your remote! Switch apps quickly, choose your favourite control style (buttons or swiping) and even enter text using your phones keyboard in supported apps.

Can you use a universal remote for Telstra TV?

The website says a Universal Remote can be used with the Telstra Tv. …

Why is my phone not connecting to Telstra TV?

If you still can’t get your device to pair with your Telstra TV app, make sure that you have the latest version of software for both your Telstra TV and Telstra TV app: To check your software is up-to-date in your Telstra TV device go to Settings in your menu and select About.

How can I mirror my phone to TV?

Android: On an Android device, open the Google Home app and scroll till you find your Google Cast device. Select it, and at the bottom of the screen hit Cast my screen. To stop, go through the same motions and select Stop mirroring. Some Android devices also let you screen share from the pull-down quick settings menu.