How do I reset my Holman Pro 469?

Turn the dial to the RUN position.
Remove the 9V battery.
Press and hold the , and program buttons simultaneously.
Press and release the Reset button on the back of the front panel.
Release all three buttons when you see 12:00a. m. on the display.

How do you set the sprinkler days?

Turn the dial to the WATER DAYS position.
Enter an interval watering schedule as described on in Setting Interval Watering above.
Press the button once.
Use the button until the cursor is at the day of the week you wish to set as a No Water Day.
Press the button to set this day as a no water day.

How do I reset my reticulation?

Resetting a Hunter X-Core is easy. To reset the irrigation controller, all you need to do is press the negative, the hand and the program keys at the same time, then use a small tool to press in the small reset button on the side of your controller. A small screwdriver or a pen will do the trick.

Where do you mount an irrigation controller?

Controllers usually operate electrically, with a backup battery that keeps the time if there’s a power outage. So, you’ll need to mount your controller within 6 feet of an electrical socket. You can mount it inside or out, as long as you keep it about 15 feet from other major appliances.

What does interval mean on a sprinkler system?

Interval Watering is a feature that allows you to select the number of days to pass before the next watering day. For example, an interval of 3 will cycle the program once every three days and water on the third day. An interval of 1 is every day and an interval of 2 will water every other day.

What makes Holman dial Ezy Gardener 6 station controller?

Rain Sensor Ready™ (RSR™): A key feature of this unit is the inclusion of Holman’s Rain Sensor Ready (RSR™) technology. It allows the controller to accept a rain sensor with the information going straight into the electronics. NOT just cutting the common to all valves! RSR™ offers “individual station selection” for ultimate sensor control.

What can I do with dial Ezy indoor controller?

Multiple Manual Operations: Run a start – a group of selected valves on the same start time, Run an individual station – water only one station or Run a test cycle – runs all stations for 2 minutes, great for maintenance and to test the entire system in one simple step. Easily suited to the DIY handyman with simple installation and system set up.

How many stations can a dial Ezy be used for?

The Dial Ezy is available in a 4 and 6 station configuration. Designed for residential applications, this controller has four separate start times and a station can be assigned to a maximum of four starts per day. Each start time can be set as a separate watering schedule.

What’s the start time on the dial Ezy gardener?

The Start Time is just the time you want the controller to turn on the water. For example, if you want to water at 6.00am then you will enter “Start 1” 6.00am.

How many hours does a dial Ezy gardener run?

3 programs, each of which has 4 start times. Maximum of 12 start times per day. Station run times from 1 minute to 12 hours & 59 minutes. Selectable watering options: – Individual 7 day selection.

How do I reset my Holman Pro 469?