How do I reset my easy dial orbit?

Reset to Factory Default – Orbit Irrigation B-hyve Help. To reset your timer back to factory settings: Turn the timer to the OFF position by rotating the dial. Open the front panel and press the reset button for 10 seconds.

How do I turn off orbit water timer?

Reset to Factory Default – Orbit Irrigation B-hyve Help. To reset your timer back to factory settings: Turn the timer to the OFF position by rotating the dial. Open the front swing panel and press and hold the reset button for 10-12 seconds.

How do I reprogram my orbit sprinkler system?

Programming 6-Station Timers

Turn the dial to “Cycle Start Times.”
Press the “+” or “-” to set the start time.
Press “Enter” to confirm the start time.
Press “Next” to set the start time for each additional program, following the same procedure.

Why isn’t my orbit sprinkler not working?

There are various issues that may your Orbit sprinkler timer not work. It could range from a bad connection to a defective timer. Check the connection to the docking port to make sure your timer is plugged in properly. If the problem persists, remove the timer and reinsert it into the docking port.

Why is my orbit easy dial 6 not working?

Orbit Easy Dial 6 station will not see AC power intermittently and will not run all the stations. replace the ac adapter, you should have 24 VAC out of it, check the 24 VAC when each station is running. Orbit Hardware &… • Answered on

How to fix an orbit 4 station timer?

I have an Orbit 4 station timer, I’ve tried to reset / program several times. The problem is it repeats each station 2 times. sounds like you have multiple start times. unplug, remove battery after 5 minutes plug transformer back in and install battery. If unit is ne return it

What to do if your orbit Watermaster timer is not working?

If you are having trouble with your Orbit Watermaster timer, you can try to resolve it by performing the troubleshooting steps below. Check the programming settings and adjust them on the control panel if one or more stations are not turning on. There are varying programming settings for different models.

How can I reset the water on my orbit?

To reset this, turn the dial to Budget (between Off and How Often). Use the +/- buttons to change the amount of water provided. (The % symbol will show if the control is set to program watering budget. It will also show if the amount of water to be provided is not the default 100%.)

How many zones can you water with Orbit 4 station timer?

Orbit’s 4 Station Easy Dial Timer allows you to water up to 4 different zones. 2 separate programs provide flexible watering. Battery back-up relieves watering stress and preserves programming in the case of a power outage.

How do I reset my easy dial orbit?