How do I make my Grohe shower colder?

How do I make my Grohe shower colder?

This is a simple procedure with a GROHE thermostat.

1. Open the shut-off valve and check the temperature of the water with a thermometer.
2. Lever out cap.
3. Remove screw.
4. Detach temperature control handle.
5. Turn regulating nut until the water temperature has reached 38 °C.

How do I make my Grohe shower hotter?

How to Increase Hot Water Flow on a Grohe Faucet

1. Locate the set screw on the underside of the temperature control adjustment lever or knob.
2. Remove the handle stop disk by pulling outward and toward you.
3. Slowly turn the temperature control knob counterclockwise toward the “hot” position.

How do you remove a Grohe handle shower temp control?

If there’s no sign of a screw head, look for a small metal circle. This is a decorative cap that covers the screws holding your Grohe shower temperature control handle in place. Use a small flat-head screwdriver to pop off the cap, followed by a hex key to take out the newly exposed screw.

How do you remove a Grohe handle?

To remove either handle, you simply grip it and pull upwards. If it doesn’t come off, wiggle it back and forth a bit while you pull harder. If you can’t muster enough strength to lift it, you may need to use locking pliers.

How to increase hot water flow on a Grohe shower?

1 Adjust the Faucet to Prevent Scalding. 2 Adjust the Heat Regulator on a Shower Faucet. 3 Install a Delta 13/14 Series Shower Faucet. 4 Fix the Temperature Control on a Single Handle Faucet.

What’s the setting on a Grohe shower handle?

Grohe shower faucets are preset at the factory to allow for a maximum hot water temperature setting. This setting is actually related to the position of the handle, as it controls how far open the hot water valve is and, therefore, how much hot water is mixed in with the cold.

How does the Grohe smartcontrol work in the shower?

Simply turn the GROHE ProGrip handle to increase the volume – from Eco to Full Flow – and turn down to reduce it. Press to pause the water if you wish. SmartControl even lets you store your preference for the next time. Push the button to start the shower. Turn to adjust the water volume gradually from Eco to Full Flow.

How do you shut off a Grohe shower faucet?

Shut the faucet off by turning the adapter to closed and line up the limit stop dial with the number you noted previously. Assemble the faucet by replacing the temperature control knob and handle, then tighten the handle screw. Turn on the water and operate the faucet.

Is there a temperature valve on a Grohe shower?

This in effect limits the amount of hot water that is mixed with cold water. You will always get a certain amount of cold water even if the cold water handle is in the “off” position. The latest Grohe shower faucets, such as the Grohtherm 3000+, feature a digital temperature valve.

What should I do if my Grohe shower line is too hot?

Hold the tip of the thermometer in the stream of water until the line stops moving. If the temperature reading is too hot, turn the bottom stem to the right. If it’s too cold, turn it to the left.

Shut the faucet off by turning the adapter to closed and line up the limit stop dial with the number you noted previously. Assemble the faucet by replacing the temperature control knob and handle, then tighten the handle screw. Turn on the water and operate the faucet.

How does Grohe turbostat work in the shower?

GROHE TurboStat technology lies at the heart of our Grohtherm® thermostatic valves. The thermoelement’s unrivaled sensitivity means it delivers water at the desired temperature within a fraction of a second – and keeps it constant for the duration of the shower. No more time, water and energy wasted getting the temperature right.