How do I know what Kohler faucet I have?

How do I know what Kohler faucet I have?

Identifying Your Faucet Model

1. The model number is printed on a tag that is attached to the cold water supply line of the faucet.
2. The supply line is located below the sink, countertop, bath rim, or behind the bowl of a bidet.
3. The model number, or part number, is typically preceded by “P/N.”

Can you repair a Kohler two handle faucet?

Although Kohler faucets are made with the highest quality, like anything else with moving parts, they may need service from time to time. Kohler faucets are designed for the homeowner to repair. Installing new valves in a two handle faucet is something almost anyone can do! Turn off the water to your faucet and remove the handle (Fig. 1).

Where is the washer on a Kohler revival faucet?

Beneath the faucet valves on all models of Kohler Revival faucets is a washer held in place with the nut that also holds the faucet’s stem. Over time, the washer may corrode or fail, which could lead to leaking from the base of the faucet handles.

What to do if your Kohler Kitchen Sink washer is faulty?

Shut off the water to the faucet at the valves below the sink. Turn on the faucet to drain the water lines. Sponge up any water on or around the counter that may have come from the faulty washer. Disconnect the water lines that lead from the faucet valve or valves to the faucet spout.

How do you change a shower head mounted to a wall?

Here are simple instructions to change a shower head that is mounted to a wall: Turn off the faucet: If you try to remove the existing showerhead with the faucets turned on, water will shoot everywhere. As long as your faucets are in the “off” position and they function, it’s not necessary to turn off the water to the house.

How do you replace a Kohler shower valve?

Find a replacement Kohler shower valve at a hardware or plumbing store, make sure it is specific to your model, not just any Kohler shower faucet. You won’t be able to fix the faucet with another brand’s replacement shower valve. Insert the new Kohler shower valve and tighten the screws. Then install the trim and replace the handle.

How do you repair a Kohler kitchen faucet?

Fix a leaking Kohler faucet. Fix a leaking Kohler faucet base or handle by unscrewing the handle set screw with an Allen wrench and pulling the handle off. Then remove the bonnet nut under the handle of the Kohler faucet and take the cartridge out. Replace it with a new cartridge and reassemble the faucet to finish troubleshooting.

How do you remove the shower faucet handle?

Remove Faucet Handles Turn the shut-off valve on the water line for the shower and tub to turn off the water. Place the tip of a screwdriver beneath the edge of the decorative cap on a handle to pry it off. Turn screws in the center of the faucet handles counterclockwise to remove them, and pull the handles off.