Do you have to etch concrete before epoxy

The short answer is: Yes, even new concrete needs to be etched before applying epoxy or a similar type of garage floor coating. Etching is part of the concrete preparation process. … Also known as concrete surface profiling (CSP), the process of acid etching opens the pores of the concrete and creates a rougher surface.

What happens if you don't etch concrete before epoxy?

In Closing. New concrete must be etched before applying the epoxy. The smooth surface of unaltered concrete won’t bind with other materials, such as epoxy or paint. As a result, epoxy will peel and lift away, failing to adhere to the surface.

Can you put epoxy over concrete?

Epoxy coatings are normally applied over concrete floors to provide a high-performance, smooth, and durable surface that can last many years and withstand heavy loads.

Is etching concrete necessary?

Etching is a crucial step in preparing concrete for painting. It gives the surface tooth to adhere to, so your paint is more likely to stick for a long time. Most concrete paints require etching and if they don’t, do it anyway. Don’t skip this step if you want a long-lasting painted concrete floor.

Can I sand concrete instead of etching?

Yes, you will need to grind in order to remove the sealer at the surface and provide a proper profile for the coating. You cannot acid etch. The reason is that the sealer prevents the acid from reacting with the minerals in the concrete since the concrete is sealed.

How do you know if concrete is ready for epoxy?

The concrete will immediately, or at least within a minute, darken as the water absorbs in areas with no contaminants. You would immediately notice whitening or a frosty hue in areas that have silicone-type contaminates. Further, check to see if the water beads up and then takes more than a couple of minutes to absorb.

Can you etch concrete without acid?

If you want to avoid acid altogether, then another product that works well as an alternative to acid etching your garage floor is a product called Eco-Etch Pro. It is a plant based, biodegradable product that will not harm plant life, is non-corrosive, will not burn your skin, and neutralizes with water.

How do I prep my garage for epoxy coating?

1. Clean and Degrease the Floor. Use a broom and wet-dry vacuum to clean debris from the floor. …
2. Etch the Concrete. Etch the concrete floor using the etching solution provided in the epoxy coating kit, following the manufacturer’s directions. …
3. Prepare the Room. …
4. Mix the Epoxy. …
5. Apply the Epoxy. …
6. Let the Garage Floor Dry.

How long does concrete take to dry before epoxy?

New slabs of concrete should be allowed to fully cure for 30-60 days before a coating is applied. If a sealer was previously used on the concrete (if water beads up on the surface), do not use epoxy. The sealer should be removed first by shot blasting.

How soon can you paint after etching concrete?

Sealers range from 24 to 72 hours as a general rule, while epoxy paint applications to the etched areas of the concrete can take up to 10 days to dry in humid conditions.

Article first time published on

Can you use vinegar to etch concrete?

Vinegar: The Good, Bad and Downright Ugly Truth as a Cleaning Agent. … Etching – Vinegar’s ability to dissolve CaCO3 will dull your marble, travertine, concrete and terrazzo surfaces. It may “clean” the surface but it is also dissolving pits into the finish and effectively dulling it.

Do you have to etch old concrete before painting?

Without the etching procedure, the paint will not adhere to the surface. It will peel off and might sink into the surface rather than stick over the top of it, so the color will be weakened. All concrete surfaces need to be etched before painting, regardless of how new or old they are.

What can you use to etch concrete?

Muriatic acid, also known as hydrochloric acid, is the typical acid of choice when etching concrete.

What can I use instead of muriatic acid?

Not all muriatic acid is the same! Acid Magic is the safe alternative to muriatic acid.

Can you put epoxy over self leveling concrete?

Another huge benefit to using epoxy for a self-leveling overlay is the fact that epoxy itself is a sealer. In theory, assuming your floor doesn’t require more than one coat of epoxy self-levelling overlay, you could do one coat and your floor would be level, sealed and the colour you want.

Do I need to prep new concrete for epoxy?

Before Applying Epoxy The absolute first step before applying your epoxy coating, is to prep your floor. It is essential that you clean your floor thoroughly. If you’re working on a concrete base, fill in any cracks or patch areas that need care before you start to clean.

How long after pressure washing concrete can you epoxy?

We highly suggest 45 or more days of curing (depending upon weather conditions). Faster curing concrete can be used, but discuss it with Stronghold Floors staff first.

How long should concrete dry after etching?

Two gallons of mixed etching solution will cover up to 500 square feet. Allow to dry for 24 hours before staining, sealing or coating.

Do I need to grind my garage floor before epoxy?

However, for larger commercial jobs, older concrete, or worn floors we always recommend grinding before epoxy installation. … The concrete floor will fail if the coating doesn’t bond mechanically to the concrete floor, so the preparation is the most important part before applying any type of epoxy!

Can you epoxy your garage floor yourself?

Epoxy garage floors are a great DIY project you can do to spruce up your home. Epoxy will make your floors look nice, clean up easily, and give your garage a finished look. … You must spend the time to properly clean and prep your garage. If you do, the end results will be fantastic.

What should concrete look like after etching?

After etching, the surface of the concrete should have a uniform texture like that of sandpaper. Repeat the etching process on any smooth spots.

How much does it cost to acid etch concrete?

Level of ServiceCost Per Square FootBasic$2-$4Intermediate$4-$10Upgraded$8-$15High-end$12-$25

What does etching do to concrete?

Etching (or washing) concrete with a liquid etch solution opens the pores of the concrete to prepare the surface for the next treatment. This allows the coating to better penetrate and adhere to the surface, providing a better, longer lasting finish.

Is epoxy flooring cheaper than tiles?

Epoxy flooring is usually cheaper than tiled flooring, but it depends on the qualities and finishes of what you compare. Epoxy can cost anywhere between $30-$100 per sqm installed. … As with concrete flooring, the larger the room, the cheaper each square metre will cost so epoxy is more cost-effective for larger spaces.

Is epoxy good for basement floor?

Epoxy flooring protects your basement floor from moisture, preventing leaks or spills from seeping into the floor below and causing structural damage. Water sits on top of epoxy, making it easy to clean. Epoxy is also resistant to germs and bacteria, eliminating any mold or mildew issues for your basement floor.

Does concrete need to be dry before etching?

Before acid etching, make sure the concrete is free of all oil, contaminants, grease, and dirt. … Do not let the concrete dry out before or during application of the acid solution. Apply the acid solution: Use the 2 gallon plastic watering container to sprinkle the acid solution on the concrete.

How do you remove etching residue from concrete?

The white powder is a combination of cement particles released from the surface and a precipitate byproduct of the etching reaction, insoluble calcium phosphate. Remove as much as possible by sweeping, scraping or vacuuming. A light dusting typically will not show through a clear coating and will not affect adhesion.

How long should muriatic acid sit on concrete?

Brush or spray the acid solution on the concrete, wait eight to 10 minutes, then neutralize the acid by spraying the surface with a mixture of one cup of ammonia in one gallon of water. Kill Mold—Use muriatic acid to kill stubborn mold and mildew on hard surfaces, such as brick, tile, concrete, and stone.

How do you acid wash new concrete?

Mix 1 cup of baking soda, garden lime, or household ammonia in 1 gallon of water (roughly 250 mL in 4 L), or follow label instructions on an acid neutralizing product. Scrub this over the concrete and let sit at least ten minute to ensure that all the acid is neutralized.