Can I use real logs in a gas fireplace

Gas fireplaces cannot burn any form of wood, whether that’s firewood logs or wood pellets. For example, firewood logs typically used in wood burning fireplaces, wood burning stoves or multi fuel stoves, or wood pellets used in pellet stoves, can’t be used in any form of gas fireplace.

What kind of logs do you use in a gas fireplace?

The three main types of gas log materials are refractory cement, ceramic fiber and refractory ceramic. Each are designed to be as realistic-looking as possible, but there are several differences to consider when choosing a gas log set for your fireplace. Refractory cement gas logs are formed from a cement mixture.

Do you need ceramic logs in a gas fireplace?

You can use a gas fireplace without logs because the heat source is the burner connected to your gas line. Don’t use wood in your gas fireplace, as they weren’t built for wood to be their fuel source. Instead, use a ceramic log in your fireplace for additional reflective heat.

Can I use a Duraflame log in a gas fireplace?

Answer: Yes, these firelogs may be used in these types of devices, however we only recommend burning one firelog at a time. The airflow produced by these devices can make the fire very hot and can also affect the burn time. Failed to get answers.

What happens when you burn wood in a gas fireplace?

Especially hazardous: Carbon monoxide, a byproduct of burning fuel which is colorless, odorless – and deadly. – Destruction. Because wood burns much hotter than natural gas or propane, it can easily destroy the internal workings of your gas fireplace.

Do you have to open the flue with gas logs?

“Fully Vented” gas logs must be burned in a fireplace that is capable of burning real wood and must be burned with the damper open. The reason for this is that they do not burn the gas cleanly and create exhaust that is very similar to burning a real wood fire. This exhaust needs to be able to go up the chimney.

What are the fake logs in a gas fireplace made of?

A: Most gas logs are made from a ceramic fiber or refractory cement mixture designed to withstand high temperatures. Sometimes steel reinforcement bars are added to the inside of the logs to increase their strength and to prevent them from bending or cracking under extreme heat.

Can you burn wood in a vented gas log fireplace?

The answer to “Can you burn wood in a gas fireplace?” is a resounding NO! That is, if your setup is a true gas-only fireplace. In this type of installation, burning wood is extremely hazardous. With other kinds of gas fireplaces, you might be able to burn wood, but only under the right conditions.

Are fake fireplace logs safe?

Artificial firelogs are safer to use. When you follow the directions for using artificial logs, the fires will not be as hot, so you can enjoy sitting closer to the flame. These firelogs are also less likely to start a dangerous chimney fire.

Why are Duraflame logs bad?

Other sites state that frequently burning fire logs (and even wood) can pose some health concerns. The carbon monoxide emitted can cause symptoms including headaches, dizziness or nasuea. … The Duraflame site states that, “…they only burn with flames and do not generate adequate coals for cooking.”

Article first time published on

How should logs be placed in a gas fireplace?

1. Place the largest ceramic logs on the bottom to serve as the foundation for the fire. …
2. Leave 2 inches (5 centimeters) between logs.
3. Make sure none of the logs is blocking the gas flow. …
4. Arrange smaller logs on top of the foundation logs.

Are Vented gas logs safe?

Vented gas logs are safer than ventless logs because they use a type of venting or exhaust system to expel harmful gas from your home. To make sure your vented gas logs are working the way they should, it’s essential to keep your chimney or flue damper open while the vented gas fireplace is in use.

How can I make my gas logs more realistic?

Use vermiculite instead. You can find rock wool, silica sand, vermiculite and crackling ash granules at a fireplace supply store or order online. You may need to turn the fireplace off and shift the rock wool around until it resembles a realistic pile of embers.

Can you burn wood in a gas starter fireplace?

Gas starters, also known as log bars, are a wonderful, convenient and safe way to start your wood fire. The biggest benefit to a gas starter is you will have less creosote and a healthier start to your fire. It works like this. Stack your wood on a grate just like you would normally.

Are there different types of gas logs?

There are two main types of gas logs: vented and ventless. Vented logs look more realistic. They allow the flame to actually touch the log, wrapping and flickering around it, and offering a more natural flame pattern – like that of a wood fire.

Are my gas logs vented or unvented?

Follow the gas line from beneath the logs to where it disappears in the wall or floor. If the gas is merely contained by a simple gas line, then the logs are vent free. If there is a small cylinder attached to the gas line, then the logs are vent-free.

Do gas logs heat a room?

Vent-free gas logs are an inexpensive and efficient way to add extra heat to a room without having to open the damper on your fireplace. These logs use the air from within the room for combustion and then put heat back out into the room.

Which is better vented or ventless gas logs?

Ventless fireplaces are more energy efficient than vented fireplaces because no heat escapes up the flue, so you’ll save money on gas utility bills. A vented gas fireplace uses more gas to create the same level of warmth because some of its heat escapes through the flue.

Are fire logs bad for your fireplace?

This is a myth. Artificial firelogs are not bad for your fireplace; in fact, they’re cleaner, safer, easier, and cheaper than regular wood. Artificial firelogs are also known as fake firelogs, wax firelogs, or artificial wax firelogs.

Can you use fire logs in a fireplace?

Using Imitation Logs in Fireplaces Imitation logs are quite different from actual wooden logs. While wooden logs can be stacked within the fireplace, imitation logs can only be burned one at a time. Imitation logs are quite easy to burn. Simply stick one in the fireplace and light it.

Are starter logs toxic?

These logs are designed to start fires in fireplaces easily, as they are highly flammable. If ingested by dogs, the compressed sawdust and wax within these logs can result in a foreign body obstruction in the stomach. Some types of these logs contain heavy metals also, and there is rare risk of heavy metal toxicity.

Do gas fireplaces need a flue?

Do Gas Fireplaces Need A Flue? Natural vent gas fireplaces may not have a flue but will use the existing chimney flue to vent waste air from a home. Direct vent gas fireplaces will need a flue that vents air directly out of a home, and ventless gas fireplaces won’t need any form of flue.

Are Duraflame logs cancerous?

Wood and synthetic logs are sources of polycyclic aromatic hydrocarbons (PAHs), which cause mammary cancer in animal experiments. Both contribute to residential air pollution, but researchers found that only the synthetic logs were found to be associated with an increased risk of breast cancer.

Which fire log is best?

• Best Overall: Duraflame Gold Firelog.
• Best Value: Pine Mountain 3-Hour Firelogs.
• Best Long Lasting: Pine Mountain Classic 4-Hour Firelog.
• Best Eco-Friendly: Pine Mountain Java Log.
• Best Sound: Duraflame Crackleflame.

Are chimney cleaning logs effective?

Many homeowners wonder if the chimney sweep logs or creosote sweeping logs really work to clean out fireplace flues and get rid of creosote residue so that the fireplaces are safe to use. The short answer is no, they don’t work. At least, not well enough to completely clean out the flue the way it should be cleaned.

Can I install gas logs myself?

Gas log installation should only be done by a certified professional. Homeowners should never install their own gas logs unless they have the tools and training to do so.

Why are my gas fireplace logs turning black?

Soot buildup is commonly caused by clogged burner ports and improperly positioned fire-logs. A fire-log that’s out of position can obstruct the flame path that ensures the clean-burning of gas. This contributes to soot formation on the fireplace. Another primary cause of soot is clogged gas burner ports.

Do gas logs give off carbon monoxide?

Yes, gas fireplaces are one potential cause of carbon monoxide poisoning. While there are many potential sources of such exposure, including certain appliances and devices, motor vehicles and wood stoves, gas fireplaces are a common culprit.

Can gas logs cause a chimney fire?

It is fueled by gas and is often mistaken for wood because the fire looks very much like a wood-burning fire and lets out about the same amount of heat. Vented gas logs generate some soot and carbon just like wood-burning fires and can leave deposits in the chimney the same way.

How can I make my natural gas fireplace look real?

1. Step 1 | Install the burner bed on andirons with a grate or in a fire basket. …
2. Step 2 | Invest in beautiful ceramic logs. …
3. Step 3 | Place a fireback against the back wall of the fireplace. …
4. Step 4 | Place antique fireplace accessories around the fireplace.

What do you put under gas logs?

Silica sand is used in the bottom of the burn pan of VENTED NATURAL GAS log sets. The gas is dispursed though the sand spreading it around before it is ignited. This gives you more flame action in your gas logs. Replace the sand every few years to keep your flames dancing.